I would want the relief to be like the green sketch drafted on top of the part, so that the sheet can be CNC machined.
However, the relief always turns out as two small rectangles, even when the relief parameters are set to "round":
I also tried the more manual approach of selecting the two corner edges and using the "add corner relief" tool, but this just produces tracebacks:
Code: Select all
14:10:51 Traceback (most recent call last):
File "/home/sam/snap/freecad/common/Mod/sheetmetal/./SheetMetalCornerReliefCmd.py", line 453, in execute
s = smCornerR(reliefsketch = fp.ReliefSketch, ratio = fp.SizeRatio, size = fp.Size.Value, kfactor = fp.kfactor,
File "/home/sam/snap/freecad/common/Mod/sheetmetal/./SheetMetalCornerReliefCmd.py", line 268, in smCornerR
DetailList = getBendDetail(resultSolid, REdgelist[0], REdgelist[1], kfactor)
File "/home/sam/snap/freecad/common/Mod/sheetmetal/./SheetMetalCornerReliefCmd.py", line 231, in getBendDetail
bendR = cylface.Surface.Radius
<class 'AttributeError'>: 'Part.Plane' object has no attribute 'Radius'
Version info:
Code: Select all
OS: Ubuntu Core 20 (ubuntu:GNOME/ubuntu-xorg)
Word size of FreeCAD: 64-bit
Version: 0.21.0.33348 (Git) Snap 720
Build type: Release
Branch: master
Hash: ec2f74a535d411a7ce645960b28a463525c0dc54
Python 3.8.10, Qt 5.15.7, Coin 4.0.0, Vtk 7.1.1, OCC 7.6.3
Locale: English/United States (en_US)
Installed mods:
* FeedsAndSpeeds 0.5.0
* Manipulator 1.5.0
* DynamicData 2.46.0
* toSketch 1.0.1
* fasteners 0.4.56
* lattice2 1.0.0
* Assembly3 0.12.0
* sheetmetal 0.2.63
* Assembly4 0.50.2