Part Design: Draft Angle Tool [Solved]

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
frcaduser
Posts: 351
Joined: Wed Apr 07, 2021 11:22 pm

Part Design: Draft Angle Tool [Solved]

Post by frcaduser »

Version 0.20.2
Rev. # 29603 (Git)
Release Date 2022/12/07 02:35:37
OS Windows 10 Version 2009
Word Size 64-bit

Hello,

I am attempting to apply a draft angle to an enclosure by using the draft tool from the Part Design workbench. If I apply the draft angle to the enclosure from the inside, it will work as highlighted by the screenshot attachment. However, still receiving the error 'Adding face failed on
Face9. Omitted
.' When I attempt to apply the same draft angle but on the outside surface, I get the same error, but the draft angle is not
applied.

Note that the neutral plane is the top perimeter surface.

Why would the draft tool not work for the outside surface?

frcaduser
Attachments
draftAngleInside_01.png
draftAngleInside_01.png (19.4 KiB) Viewed 217 times
enclosureDraftAngle.FCStd
(32.54 KiB) Downloaded 11 times
draftAngleInside.png
draftAngleInside.png (28.96 KiB) Viewed 250 times
Post Reply