0.21 splashscreen contest: deadline 31 May 2023
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: 0.21 splashscreen contest
and another design...
- Attachments
-
- kilavuz_2.png (247.73 KiB) Viewed 3081 times
-
- kilavuz.png (348.19 KiB) Viewed 3081 times
-
- e40.png (98.43 KiB) Viewed 3081 times
Re: 0.21 splashscreen contest
I would very much like to see @ppemawm's Atkinson Differential Engine as splash screen, e.g. the left upper image of the complete engine in the first post. There are multiple reasons to use this as splash screen:
- it is a great model
- it is completely made in FreeCAD
- it is discussed broadly here in the forum, so that interested users can dive deep into the modeling.
- it is a great model
- it is completely made in FreeCAD
- it is discussed broadly here in the forum, so that interested users can dive deep into the modeling.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0.21 splashscreen contest
This is a fantastic model. The support in terms of describing how it is built is close to unparalleled on the forum. Great tutorial for FreeCAD.
However, the prototype is more than 140 years old. Would this send the wrong message about the modern utility for FreeCAD?
Gene
Re: 0.21 splashscreen contest
Then it is high time to use it as splash screen for FreeCAD.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0.21 splashscreen contest: deadline 31 May 2023
Thank you for the kind comments.
Please note that this is NOT a FreeeCAD model in this image, but rather, it is the first sheet of the drawings by Pendargrast. I would suggest the first image of the second post. Or, better yet, one from Bernard19. He has certainly earned it.
"It is a poor workman who blames his tools..."
-
- Posts: 16
- Joined: Fri May 31, 2019 8:35 pm
Re: 0.21 splashscreen contest: deadline 31 May 2023
Here is my entry for the splash screen (a Blender Render and a FreeCAD Screen shot)... you can find the files for the model on GrabCAD https://grabcad.com/library/t12-digital ... atteries-1 along with many other models both simple and vastly complex, but all done completely in FreeCAD.
- Attachments
-
- Splash Screen B.png (229.55 KiB) Viewed 2754 times
-
- Splash Screen C.png (107.05 KiB) Viewed 2754 times
-
- Splash Screen A.png (106.19 KiB) Viewed 2754 times
Re: 0.21 splashscreen contest: deadline 31 May 2023
Good idea. You both have earned it, you as modeler and tutor, he as a learner!
@Bernard19, care to make a proposal - or two?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: 0.21 splashscreen contest: deadline 31 May 2023
Yes, good idea, but why not use Render WB instead of Blender? (or at least both). And as far as I can see, there is no license information with the model, this should be clarified with the owner, in my opinion.
Re: 0.21 splashscreen contest: deadline 31 May 2023
Well. Cool pictures but did you get an official authorization from Ryobi to use it as a branding mark in a product?nelsonstoldt wrote: ↑Wed May 17, 2023 2:56 am Here is my entry for the splash screen (a Blender Render and a FreeCAD Screen shot)...
Re: 0.21 splashscreen contest: deadline 31 May 2023
It should be clear that we do not want to be anywhere close to either of these potential problems.
Copyright infringement.
Anything other than 100% FreeCAD.
Gene
Copyright infringement.
Anything other than 100% FreeCAD.
Gene