So here we go:
1) Wrong driving constraints
- Edit Sketch001 in the attached file -> you see a normal (red) constraint measuring the external line
(- if you want to add such a constraint, do it by selecting the endpoints) - this is not correct, but things get bad, as it is possible to change that constraint: 2) Crash
- Edit Sketch001 in the attached file
- select the external line
- add a horizontal distance constraint
- this is independent from selecting driven or driving constraints
Please test, especially with other OS.
Code: Select all
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.21.0.32532 (Git)
Build type: Release
Branch: master
Hash: 20e44eba50e1365b9e7bb9c5c244afe96a627a28
Python 3.10.10, Qt 5.15.8, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: C/Default (C)
Installed mods:
* FC_SU
* DynamicData 2.46.0
* freecad.gears 1.0.0
* FeedsAndSpeeds 0.5.0
* dxf-library
* fcgear 1.0.0
* fasteners 0.4.54
* sheetmetal 0.2.62
* ExplodedAssembly
* Curves 0.6.8