(WORKAROUND) incomplete ifc export. operating error?

This forum section is only for IFC-related issues
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by thomas-neemann »

bernd wrote: Tue Mar 28, 2023 10:04 am ...
ok
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by thomas-neemann »

but as at the beginning there seems to be a problem with compounds. here is a file from solids
Bildschirmfoto_2023-03-28_14-20-40.png
Bildschirmfoto_2023-03-28_14-20-40.png (53.87 KiB) Viewed 8420 times
1416.FCStd
(42.13 KiB) Downloaded 86 times


that is exported as ifc
Bildschirmfoto_2023-03-28_14-19-21.png
Bildschirmfoto_2023-03-28_14-19-21.png (35.03 KiB) Viewed 8420 times
Bildschirmfoto_2023-03-28_14-20-10.png
Bildschirmfoto_2023-03-28_14-20-10.png (36.47 KiB) Viewed 8420 times
1416.ifc
(14.8 KiB) Downloaded 87 times
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by thomas-neemann »

these 2 possible types of faces are exported as ifc
Bildschirmfoto_2023-03-28_17-55-30.png
Bildschirmfoto_2023-03-28_17-55-30.png (7.86 KiB) Viewed 8378 times
1753.FCStd
(8.81 KiB) Downloaded 85 times
Bildschirmfoto_2023-03-28_17-56-16.png
Bildschirmfoto_2023-03-28_17-56-16.png (14.62 KiB) Viewed 8378 times
1753.ifc
(4.41 KiB) Downloaded 86 times
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by thomas-neemann »

mesh did not work for a more complex file. there a draft upgrade to block, then converting to solid in curves helped before the ifc export. so everything should work
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by thomas-neemann »

apparently there are problems with the face export on top plane. but draft block with curves works solid here too
Bildschirmfoto_2023-03-28_20-52-46.png
Bildschirmfoto_2023-03-28_20-52-46.png (11.56 KiB) Viewed 8332 times
Bildschirmfoto_2023-03-28_20-53-40.png
Bildschirmfoto_2023-03-28_20-53-40.png (19.78 KiB) Viewed 8332 times
Bildschirmfoto_2023-03-28_20-54-49.png
Bildschirmfoto_2023-03-28_20-54-49.png (12.67 KiB) Viewed 8332 times
Bildschirmfoto_2023-03-28_20-55-40.png
Bildschirmfoto_2023-03-28_20-55-40.png (12.65 KiB) Viewed 8332 times
1753ko.FCStd
(9.83 KiB) Downloaded 89 times
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
bernd
Veteran
Posts: 12849
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by bernd »

the face export problem might better go into a separate topic ...

In the regard of your compound solid export ... For me all objects are in the ifc. It seams some placement is wrong on export and thus one of the objects moves inside the other and it looks like something is missing ... Attached screen from your ifc attached to your post ...


screen.png
screen.png (105.21 KiB) Viewed 8310 times
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by thomas-neemann »

video from workaround

viewtopic.php?p=671821#p671821
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
bernd
Veteran
Posts: 12849
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland
Contact:

Re: (WORKAROUND) incomplete ifc export. operating error?

Post by bernd »

made a new separate topic for the placement problem of the nested objects viewtopic.php?t=77785
Post Reply