Hope this can help someone else...
I had to change one sketch of a pocket feature and after that, it broke another pocket of a previous feature, some faces look broken and the pocket didn't work as expected.
I found it strange that changing a feature that was made after this one would break it and I tried different things to fix the issue.
This is a PartDesign part, so I tried recomputing the whole part or the feature that has the issue, but it didn't work.
What worked was to Mark to Recompute the previous feature and then right click on the part and recompute.
--------
In the future if I find a similar issue I will probably just select all features, mark them all to recompute, select the part and recompute it.
Fix broken face
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: Fix broken face
FYI: There is a "Mark to recompute" in the context menu of the tree root (= the filename).
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- Shalmeneser
- Veteran
- Posts: 9560
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Fix broken face
Can you provide the file ?
Re: Fix broken face
Did you really mark the topmost element?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Fix broken face
Ah, yes you're right, I misunderstood you.
Marking the root (document) to recompute does work!