No, there was not any, i will test it later.
Now i pulled the last master and compiled it in the other machine (no clean from scratch build, just a recompile with ccache), there was still the ImageWB, but it does not crash, as long it will not be used further then the dialogs, which is OK for this wip state. Also there are 4 different FreeCAD builds on this machine.
Code: Select all
Err: Program received signal SIGSEGV, Segmentation fault.
Err: #0 /lib/x86_64-linux-gnu/libc.so.6(+0x38d60) [0x7f0ae60f3d60]
Err: #1 0x7f0ae8283009 in App::Transaction::addObjectDel(App::TransactionalObject const*) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADApp.so+0x89
Err: #2 0x7f0ae8173be2 in App::Document::addObject(char const*, char const*, bool, char const*, bool) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADApp.so+0x3a2
Err: #3 0x7f0ae82313e4 in App::DocumentPy::addObject(_object*, _object*) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADApp.so+0xd4
Err: #4 0x7f0ae8232384 in App::DocumentPy::staticCallback_addObject(_object*, _object*, _object*) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADApp.so+0x24
Err: #5 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(+0x10cc93) [0x7f0ae781cc93]
Err: #6 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(_PyObject_MakeTpCall+0x90) [0x7f0ae77d6a50]
Err: #7 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(_PyEval_EvalFrameDefault+0x8632) [0x7f0ae77882f2]
Err: #8 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(+0x1a4ddc) [0x7f0ae78b4ddc]
Err: #9 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(_PyEval_EvalCodeWithName+0x4e) [0x7f0ae78b512e]
Err: #10 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(PyEval_EvalCodeEx+0x3e) [0x7f0ae78b517e]
Err: #11 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(PyEval_EvalCode+0x1b) [0x7f0ae78b072b]
Err: #12 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(+0x1e9735) [0x7f0ae78f9735]
Err: #13 /lib/x86_64-linux-gnu/libpython3.9.so.1.0(PyRun_StringFlags+0x93) [0x7f0ae78fa013]
Err: #14 0x7f0ae7e00718 in Base::InterpreterSingleton::runString[abi:cxx11](char const*) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADBase.so+0x58
Err: #15 0x7f0ae8b2979f in Gui::Command::_runCommand(char const*, int, Gui::Command::DoCmd_Type, char const*) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADGui.so+0x7f
Err: #16 0x7f0ae8b298ff in Gui::Command::_doCommand(char const*, int, Gui::Command::DoCmd_Type, char const*, ...) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADGui.so+0xcf
Err: #17 0x7f098b476968 in CmdCreateImagePlane::activated(int) from /home/user/Programs/FreeCADmaster/build/Mod/Image/ImageGui.so+0x3b8
Err: #18 0x7f0ae8b2ce4b in Gui::Command::_invoke(int, bool) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADGui.so+0x1fb
Err: #19 0x7f0ae8b2d20e in Gui::Command::invoke(int, Gui::Command::TriggerSource) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADGui.so+0xfe
Err: #20 /lib/x86_64-linux-gnu/libQt5Core.so.5(+0x2e45a6) [0x7f0ae675b5a6]
Err: #21 0x7f0ae71e2b62 in QAction::triggered(bool) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0x42
Err: #22 0x7f0ae71e53a1 in QAction::activate(QAction::ActionEvent) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0xe1
Err: #23 /lib/x86_64-linux-gnu/libQt5Widgets.so.5(+0x2521b2) [0x7f0ae72d81b2]
Err: #24 0x7f0ae72d82d1 in QAbstractButton::mouseReleaseEvent(QMouseEvent*) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0xf1
Err: #25 0x7f0ae73c79ca in QToolButton::mouseReleaseEvent(QMouseEvent*) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0xa
Err: #26 0x7f0ae7228fae in QWidget::event(QEvent*) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0x1ce
Err: #27 0x7f0ae71e915f in QApplicationPrivate::notify_helper(QObject*, QEvent*) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0x7f
Err: #28 0x7f0ae71f004b in QApplication::notify(QObject*, QEvent*) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0x49b
Err: #29 0x7f0ae8ae6108 in Gui::GUIApplication::notify(QObject*, QEvent*) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADGui.so+0x68
Err: #30 0x7f0ae6724fca in QCoreApplication::notifyInternal2(QObject*, QEvent*) from /lib/x86_64-linux-gnu/libQt5Core.so.5+0x12a
Err: #31 0x7f0ae71ef076 in QApplicationPrivate::sendMouseEvent(QWidget*, QMouseEvent*, QWidget*, QWidget*, QWidget**, QPointer<QWidget>&, bool, bool) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0x1d6
Err: #32 /lib/x86_64-linux-gnu/libQt5Widgets.so.5(+0x1bb011) [0x7f0ae7241011]
Err: #33 /lib/x86_64-linux-gnu/libQt5Widgets.so.5(+0x1be33e) [0x7f0ae724433e]
Err: #34 0x7f0ae71e915f in QApplicationPrivate::notify_helper(QObject*, QEvent*) from /lib/x86_64-linux-gnu/libQt5Widgets.so.5+0x7f
Err: #35 0x7f0ae8ae6108 in Gui::GUIApplication::notify(QObject*, QEvent*) from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADGui.so+0x68
Err: #36 0x7f0ae6724fca in QCoreApplication::notifyInternal2(QObject*, QEvent*) from /lib/x86_64-linux-gnu/libQt5Core.so.5+0x12a
Err: #37 0x7f0ae6aff583 in QGuiApplicationPrivate::processMouseEvent(QWindowSystemInterfacePrivate::MouseEvent*) from /lib/x86_64-linux-gnu/libQt5Gui.so.5+0x653
Err: #38 0x7f0ae6ad564c in QWindowSystemInterface::sendWindowSystemEvents(QFlags<QEventLoop::ProcessEventsFlag>) from /lib/x86_64-linux-gnu/libQt5Gui.so.5+0xac
Err: #39 /lib/x86_64-linux-gnu/libQt5XcbQpa.so.5(+0x697da) [0x7f0ae0a0a7da]
Err: #40 /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_dispatch+0x25b) [0x7f0ae44c0e6b]
Err: #41 /lib/x86_64-linux-gnu/libglib-2.0.so.0(+0x52118) [0x7f0ae44c1118]
Err: #42 /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_iteration+0x2f) [0x7f0ae44c11cf]
Err: #43 0x7f0ae677c51f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) from /lib/x86_64-linux-gnu/libQt5Core.so.5+0x5f
Err: #44 0x7f0ae672398b in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) from /lib/x86_64-linux-gnu/libQt5Core.so.5+0x12b
Err: #45 0x7f0ae672bc00 in QCoreApplication::exec() from /lib/x86_64-linux-gnu/libQt5Core.so.5+0x90
Err: #46 0x7f0ae8a3d463 in Gui::Application::runApplication() from /home/user/Programs/FreeCADmaster/build/lib/libFreeCADGui.so+0x2543
Err: #47 /home/user/Programs/FreeCADmaster/build/bin/FreeCAD(+0x997c) [0x555c8839997c]
Err: #48 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xea) [0x7f0ae60ded0a]
Err: #49 /home/user/Programs/FreeCADmaster/build/bin/FreeCAD(+0x9c2a) [0x555c88399c2a]
Code: Select all
OS: Debian GNU/Linux 11 (bullseye) (X-Cinnamon/lightdm-xsession)
Word size of FreeCAD: 64-bit
Version: 0.21.0.32637 (Git)
Build type: Release
Branch: master
Hash: 7fa7cb7f0b222864be7416c683166876eab190bc
Python 3.9.2, Qt 5.15.2, Coin 4.0.0, Vtk 9.0.1, OCC 7.7.1
Locale: English/United States (en_US)
Installed mods:
* QuickMeasure 2022.10.28
* Assembly4 0.12.6
* CurvedShapes 1.0.4
* Curves 0.6.8
Just said, i complain here nothing, it is a dev version, in a FOSS, with more then one OS, with more then 1000s files, with a few million lines of code, made from people in their spare time, in a very complicated field of usage. That there are time to time some inconveniences should be logic. Also how should they know there are issues, when there are no one using the dev version? (catch22)
Greetings
user1234