How is this happened? As you can see, the handle of two line are connected together.
I'm new on FreeCAD and please tell me how to solve this problem, thank you very much!
FreeCAD 0.19
Hi guys, I have a boolean cut problem
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 2
- Joined: Fri Mar 24, 2023 1:22 am
Hi guys, I have a boolean cut problem
- Attachments
-
- Spoon.FCStd
- (307.64 KiB) Downloaded 9 times
-
- How is this happened.png (163.93 KiB) Viewed 452 times
Re: Hi guys, I have a boolean cut problem
There is no problem. These seams are of a technical nature and are no indication of separate solids. In certain cases (on plane or cylindrical surfaces) they can be removed automatically by setting Refine=true in the last operation. This doesn't work here.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Hi guys, I have a boolean cut problem
I think OP means this:-
- thomas-neemann
- Veteran
- Posts: 11963
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Hi guys, I have a boolean cut problem
I would create the spoon like this, if you want I can link you to a video about it here
Re: Hi guys, I have a boolean cut problem
I see. I guess this is a coplanar issue. A clone may not work here, the cut may need a bit of overlap.
Besides: there are links going out of allowed scope and warnings from sketcher (which is no wonder, the sketches are rather messy). Especially the latter could be improved.
Besides: there are links going out of allowed scope and warnings from sketcher (which is no wonder, the sketches are rather messy). Especially the latter could be improved.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 2
- Joined: Fri Mar 24, 2023 1:22 am
Re: Hi guys, I have a boolean cut problem
Yes, I think I need the video. I think it's very nice to learn different ways to draft.thomas-neemann wrote: ↑Fri Mar 24, 2023 9:01 amI would create the spoon like this, if you want I can link you to a video about it here
Bildschirmfoto_2023-03-24_10-00-09.png
thank you!
- thomas-neemann
- Veteran
- Posts: 11963
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Hi guys, I have a boolean cut problem
here it isArthur Harry wrote: ↑Sat Mar 25, 2023 7:27 pm ...
Yes, I think I need the video. I think it's very nice to learn different ways to draft.
thank you!
https://www.youtube.com/watch?v=gjwRUuDRPGU