I understand now what the difference is. I did not understand that you had to move the cross section over to the body. Still, when I do that, it gives me an error "Map entry 0 is empty. Source-to-piece correspondence information is probably incomplete." when I try to convert the cross-section into a body. This problem is solved by moving the operational body back to the origin before creating the cross-section. A little annoying but at least it is solved.
Thank you!
Part Cross-section Attached to Wrong Body
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 19
- Joined: Wed Mar 16, 2022 12:44 am
Re: Part Cross-section Attached to Wrong Body
We are talking of different things to move. I didn't make any changes to the crossection parameters, I confirmed it right away.CopperGenie wrote: ↑Wed Mar 22, 2023 10:48 pm 4. Move cross-section plane to intersect the body using the tools in the Guiding Plane box
My move was: after confirming, drag-and-drop the crossection object into the Part container rev2.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.