message spamming.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: message spamming.
Good point Gene. That may explain why the rapids option was not stopping them.
Surprisingly I do not define horizontal speeds for drill bits ! That seems to be a problem for FC now.
Maybe I can set it to 1nm/min to stop it whining. It would make more sense if it warned me that I had a non-zero horizontal speed for a drill.
Thanks for spotting that, at least it gets this particular thorn out of my backside.
Surprisingly I do not define horizontal speeds for drill bits ! That seems to be a problem for FC now.
Maybe I can set it to 1nm/min to stop it whining. It would make more sense if it warned me that I had a non-zero horizontal speed for a drill.
Thanks for spotting that, at least it gets this particular thorn out of my backside.
Re: message spamming.
You are setting the speed for the drilling operation as well as the drill bit. In most cases there will be movement in the horizontal direction.
Some, but not all, will be G0 speed while other moves will be G1 speeds.
It is true that the drill is not cutting when moving horizontally, but I do not think the "cutting" has any role in path creation. It's is all about movement.
Gene
Re: message spamming.
There are feed rates and rapids. In what context would I need horizontal feed rate with a drill?
Just curious, I may be unaware of something.
Just curious, I may be unaware of something.
Re: message spamming.
I do this, but the horizontal movement is always done in plain air, and thus the horizontal speed can well be done at no matter what speed, especially at rapid speed. For various reasons it can be advised to do it slower though.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: message spamming.
Code: Select all
For various reasons it can be advised to do it slower though.
Re: message spamming.
Less stress on the machine? Less wiggle?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: message spamming.
If your CNC machine "wiggles" when it does a rapid move with no load. Good luck cutting some material.
Re: message spamming.
Has there been some PR to change this in the last days?
I just did git pull and a new build and now I'm getting what looks like errors relating to this code. I've tested a couple of backups of the project and they are all now failing.
I just did git pull and a new build and now I'm getting what looks like errors relating to this code. I've tested a couple of backups of the project and they are all now failing.
Code: Select all
23:29:54 Traceback (most recent call last):
File "/~/freecad-build-master/Mod/Path/PathScripts/PathUtils.py", line 70, in new_function
res = function(*args, **kwargs)
File "/~/freecad-build-master/Mod/Path/Path/Op/Base.py", line 828, in execute
self.job.Proxy.getCycleTime()
File "/~/freecad-build-master/Mod/Path/Path/Main/Job.py", line 678, in getCycleTime
if len(self.obj.Operations.Group):
<class 'AttributeError'>: 'ObjectJob' object has no attribute 'obj'
23:29:54 Recompute failed! Please check report view.
Re: message spamming.
I don't think that the new message window touches any of the Path code. This looks rather as if you loaded very old projects.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.