here is my own woes when trying to configure two monitors setup
I tried moving Property view, Report view, Combo view and Selection view panels to my second/right screen.
When trying to set panels size by dragging the bottom of selected panel I end up with the top of the panel going beyond screen
making it impossible to pick and drag this panel.
Here is my setup:
and what things look like after panels are moved to the right window.
all panels beyond my reach after I tried to resize them
so I restart FreeCAD and all the panels that should be on right hand screen
are now back on the left hand screen (attached to the top of the screen )
when ffafing around with panels I noticed this message:
10:11:11 QMainWindowLayout::tabPosition called with out-of-bounds value '0'
Now it could be my Linux, it could be my setup but... another CAD system I use copes with my two screens painlessly, easily and succesfuly.
I mention it NOT to put down FreeCAD, but to suggest that the problem is unlikely to be my hardware/OS ?
BTW it is possible to get there...
I was a bit more successful (although not easy either...) with my link branch setup
if anybody can offer advice I would be grateful
P.S.
@drmacro I am still trying to make your shortcut suggestion to work
Code: Select all
OS: Debian GNU/Linux 11 (bullseye) (KDE/plasma)
Word size of FreeCAD: 64-bit
Version: 0.21.0.31917 (Git) AppImage
Build type: Release
Branch: master
Hash: 4639283b459f9ff9093e289908cc003db8745b82
Python 3.10.9, Qt 5.15.6, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: English/United Kingdom (en_GB)
Installed mods:
* ToolViewReverse_ToolBar
* DynamicData 2.46.0
* sheetmetal 0.2.49
* Assembly3 0.11.3
* fasteners 0.3.40
* ThreadProfile 1.81.0
* Manipulator 1.4.3