salve a tutti ,
ho un problema con le boolean,
uso frecad 0.20.2,
e come si puo vedere dallo screen
ho selezionato il parallelepipedo e il cilindro
e quando eseguo l'apply,
invece di avere un foro
si forma la mesh che si vede in verde
, dove si vede che si è formato un cerchio.
come si fa a forare il parallelepipedo?,
ho provato anche a farlo in part design
ma non riesco a ottenere utilizzando lo skech il cilindro
per poi usarlo con bolean,
mi spiegate come si fa
Grazie.
[/attachment]
boollean
Forum rules
regole del forum e le informazioni utili
Importante: PRIMA di chiedere aiuto leggete qui!
regole del forum e le informazioni utili
Importante: PRIMA di chiedere aiuto leggete qui!
boollean
- Attachments
-
- boolean.png (197.3 KiB) Viewed 1304 times
- Shalmeneser
- Veteran
- Posts: 9475
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: boollean
come si fa a allegare il file?
Re: boollean
ecco il file di freecad
Re: boollean
ecco il file di freecad
- Shalmeneser
- Veteran
- Posts: 9475
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: boollean
https://wiki.freecad.org/Tree_view#Whit ... background
You must correct this because the following feature cannot work.
You should decide between PartDesign wb and Part wb. Follow some tutorial : Tutorials
Part_and_PartDesign
You can use sketches with Extrude inside Part wb.
Your tree must be simpler.
TNP
-----
https://wiki.freecad.org/Tree_view#Whit ... background
È necessario correggere questo perché la seguente funzione non può funzionare.
Dovresti decidere tra PartDesign wb e Part wb. Segui alcuni tutorial: Tutorial
Part_e_PartDesign
È possibile utilizzare gli schizzi con Estrusione all'interno della parte wb.
Il tuo albero deve essere più semplice.
TNP
You must correct this because the following feature cannot work.
You should decide between PartDesign wb and Part wb. Follow some tutorial : Tutorials
Part_and_PartDesign
You can use sketches with Extrude inside Part wb.
Your tree must be simpler.
TNP
-----
https://wiki.freecad.org/Tree_view#Whit ... background
È necessario correggere questo perché la seguente funzione non può funzionare.
Dovresti decidere tra PartDesign wb e Part wb. Segui alcuni tutorial: Tutorial
Part_e_PartDesign
È possibile utilizzare gli schizzi con Estrusione all'interno della parte wb.
Il tuo albero deve essere più semplice.
TNP
- Attachments
-
- Capture d’écran 2023-02-22 155926.jpg (44.33 KiB) Viewed 1069 times
-
- prova-A1_SHALM.FCStd
- (42.49 KiB) Downloaded 57 times
Re: boollean
grazie per l'aiuto