[Feature Request]: ISO shaft/hole tolerances for dimensions
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
there are artwork guidelines to follow:
https://wiki.freecad.org/Artwork_Guidelines
here the master page for all the icons
https://wiki.freecad.org/Artwork
https://wiki.freecad.org/Artwork_Guidelines
here the master page for all the icons
https://wiki.freecad.org/Artwork
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
Apart from the fact that the color selection is totally off, perhaps one can still accommodate a few additional informations on the surface of 64 x 64 pixel for the surely very soon award winning proposal...
Irony off
The suggestion of @wandererfan to the icon of the little girl and the 3 bears had something.
We could also possibly form a circle of chairs...
.
- wandererfan
- Veteran
- Posts: 6317
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
Best I can do until the art department arrives...
- Attachments
-
- shaftTolerance.svg
- (10.85 KiB) Downloaded 43 times
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
@wandererfan
Looks great.
Brings it to the point in a minimalistic way.
This is how it should be.
Looks great.
Brings it to the point in a minimalistic way.
This is how it should be.
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
I just want to note, that ISO tolerances is not only for shafts, holes and round objects, it is also for not round objects, like eg. keying.
Greetings
user1234
Greetings
user1234
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
The above published macro HoleShaftFitISO286.FCMacro has been merged as a command to the master. It will be available in the next weekly version. Documentation see:
https://wiki.freecad.org/TechDraw_HoleShaftFit
Thanks to all who helped.
https://wiki.freecad.org/TechDraw_HoleShaftFit
Thanks to all who helped.
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
Great news, I allowed myself to add this to the release notes.edi wrote: ↑Tue Feb 14, 2023 9:01 am The above published macro HoleShaftFitISO286.FCMacro has been merged as a command to the master. It will be available in the next weekly version. Documentation see:
https://wiki.freecad.org/TechDraw_HoleShaftFit
Thanks to all who helped.
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
@edi
Did you see my remark?
the upper deviation should be aligned to left not to right compared to lower one (see attachment and look at dimensions H7 and h7)
[/quote]
Did you see my remark?
the upper deviation should be aligned to left not to right compared to lower one (see attachment and look at dimensions H7 and h7)
[/quote]
- Attachments
-
- right.jpg (174.56 KiB) Viewed 939 times
-
- wrong.jpg (174.52 KiB) Viewed 939 times
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
Hi All!
im a Newbie, and i have a quick question,
i cant seem to find either the Shaft/Hole tool or the surface tool in the Techdraw Workbench
i have version 20.2
thank you in advance
regards
im a Newbie, and i have a quick question,
i cant seem to find either the Shaft/Hole tool or the surface tool in the Techdraw Workbench
i have version 20.2
thank you in advance
regards