From FreeCAD To The Real World

Show off your FreeCAD projects here!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: From FreeCAD To The Real World

Post by thomas-neemann »

here is a suitable open source electrolyser


https://forum.freecadweb.org/viewtopic.php?f=3&t=64667
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: From FreeCAD To The Real World

Post by thomas-neemann »

Conversion of 6 bar membrane air compressor to hydrogen. suitable for h2 according to the manufacturer


https://www.youtube.com/watch?v=716UVPAFjb8


phpBB [video]
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
Szzer
Posts: 71
Joined: Wed Dec 26, 2018 1:26 pm

Re: From FreeCAD To The Real World

Post by Szzer »

Since our small towable digger only came with a
I therefore designed a digger bucket attachement using FreeCAD. Especially Assembly 4.

Image


The final result after some cutting, turning and welding:

Image

edit: now with animation
Last edited by Szzer on Mon Mar 14, 2022 6:03 pm, edited 1 time in total.
User avatar
Kunda1
Veteran
Posts: 13434
Joined: Thu Jan 05, 2017 9:03 pm

Re: From FreeCAD To The Real World

Post by Kunda1 »

Since our small towable digger only came with a...
what? :lol:

Upload the gifs to dropbox or 3rd party hosting (imgur?)
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
User avatar
Szzer
Posts: 71
Joined: Wed Dec 26, 2018 1:26 pm

Re: From FreeCAD To The Real World

Post by Szzer »

Kunda1 wrote: Mon Mar 14, 2022 12:43 pm
Since our small towable digger only came with a...
what? :lol:
I could not find the translation, and halfway typing the post forgot about it :shock: .
It came with only manure forks...
User avatar
kemes
Posts: 63
Joined: Wed Mar 02, 2022 8:05 am

Re: From FreeCAD To The Real World

Post by kemes »

I live in an loft apartment where the stairs are not standard width. I had the need to install a baby gate but none of the solutions on the market suited my needs. Ended up Freecading and 3D printing the mounts for the gate which is meant to be cut into correct width. Printed the mounts out of PETG and for the past 6m they have held up well against the abuse :lol:
Attachments
tree.png
tree.png (25.05 KiB) Viewed 3576 times
mount.png
mount.png (65.6 KiB) Viewed 3576 times
mount_col.jpg
mount_col.jpg (539.93 KiB) Viewed 3576 times
thschrader
Veteran
Posts: 3129
Joined: Sat May 20, 2017 12:06 pm
Location: Germany

Re: From FreeCAD To The Real World

Post by thschrader »

Just finished:
21-m-steel mast on rooftop. Mast is for cellphone communication.
Steel parts designed and calculated with Freecad, static calculation
was done with Smath-Studio (free software). Unfortunatly I still depend on
my commercial statics software to calculate the beam forces.
However, for projects like this FC is industrial ready.
mast.JPG
mast.JPG (128.66 KiB) Viewed 3130 times
User avatar
thomas-neemann
Veteran
Posts: 11800
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: From FreeCAD To The Real World

Post by thomas-neemann »

wonderful, freecad will be widely used in companies in the near future
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
ragohix769
Posts: 565
Joined: Sat Jul 18, 2020 7:04 am
Location: Rome - Italy

Re: From FreeCAD To The Real World

Post by ragohix769 »

thschrader wrote: Wed Apr 13, 2022 6:49 am Just finished:
21-m-steel mast on rooftop. Mast is for cellphone communication.
Steel parts designed and calculated with Freecad, static calculation
was done with Smath-Studio (free software). Unfortunatly I still depend on
my commercial statics software to calculate the beam forces.
However, for projects like this FC is industrial ready.
mast.JPG
Simply FANTASTIC!
After #ElonMuskBuyTwitter I'm no more on Twitter, that's really enough :-(
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same :-)
User avatar
ragohix769
Posts: 565
Joined: Sat Jul 18, 2020 7:04 am
Location: Rome - Italy

Re: From FreeCAD To The Real World

Post by ragohix769 »

My real world stuff made with our loved FreeCAD:

Iron block system for my darkening shutter (outside the window) is broken. Easy redraw from scratch in Part Design with @FreeCADNews
and then printed. Thanks #FreeCad #opensource #community #foss :-)
Attachments
photo_2022-05-04_17-46-29.jpg
photo_2022-05-04_17-46-29.jpg (107.99 KiB) Viewed 2637 times
wepz.png
wepz.png (686.14 KiB) Viewed 2637 times
Last edited by ragohix769 on Thu May 05, 2022 1:04 am, edited 1 time in total.
After #ElonMuskBuyTwitter I'm no more on Twitter, that's really enough :-(
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same :-)
Post Reply