Collection of differences between original master version and realthunder

[thomas-neemann]

`View front face` command (with shortcut V, N) will align the camera
in the front facing orientation of the pre-selected (or selected if no
pre-selection) geometry element. If more than one element is selected,
then the average normal and base point (i.e. the picked 3D point when
selecting) will be used to determin the orientation.

`View back face` command (with shortcut V, B) will align to the oppsite
direction of the front facing orientation.

download

https://github.com/realthunder/FreeCAD/releases

Code: Select all

OS: Ubuntu 20.04.6 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2023.1102.0.14555 (Git shallow) AppImage
Build type: Release
Branch: HEAD
Hash: 53783b6707f2fd2d561a02b5542f4fbe3c1eda4a
Python 3.11.6, Qt 5.15.8, Coin 4.0.1, Vtk 9.2.5, OCC 7.7.2
Locale: German/Germany (de_DE)
Installed mods: 
  * boltsfc 2022.11.5
  * BIM 2021.12.0
  * Curves 0.6.14
  * sheetmetal 0.3.1
  * lattice2 1.0.0

[thomas-neemann]

sorting in the large parts tree....

It is now also possible in master at these two positions. It takes a bit of practice to find the positions

Code: Select all

OS: Ubuntu 20.04.6 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.21.1.33694 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 0.21.1)
Hash: f6708547a9bb3f71a4aaade12109f511a72c207c
Python 3.10.12, Qt 5.15.8, Coin 4.0.0, Vtk 9.2.5, OCC 7.6.3
Locale: German/Germany (de_DE)

[thomas-neemann]

surface in realthunder can e.g. detect a hole.

Bildschirmfoto_2023-11-21_11-24-54.png (11.17 KiB) Viewed 2322 times

Code: Select all

OS: Ubuntu 20.04.6 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2023.1102.0.14555 (Git shallow) AppImage
Build type: Release
Branch: HEAD
Hash: 53783b6707f2fd2d561a02b5542f4fbe3c1eda4a
Python 3.11.6, Qt 5.15.8, Coin 4.0.1, Vtk 9.2.5, OCC 7.7.2
Locale: German/Germany (de_DE)
Installed mods: 
  * boltsfc 2022.11.5
  * Curves 0.6.14
  * lattice2 1.0.0

workaround in master : subshapebinder (part design)

[thomas-neemann]

There is a difference when creating a sketch in PartDesign


master

Bildschirmfoto_2023-11-22_17-32-46.png (36.28 KiB) Viewed 2233 times

```
OS: Ubuntu 20.04.6 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.22.0dev.35046 (Git) AppImage
Build type: Release
Branch: main
Hash: 6a66034ce27290e7b385a933d77375f55492d194
Python 3.10.13, Qt 5.15.8, Coin 4.0.0, Vtk 9.2.6, OCC 7.6.3
Locale: German/Germany (de_DE)
Installed mods:
* boltsfc 2022.11.5
* Curves 0.6.14
* lattice2 1.0.0
```


realthunder

Bildschirmfoto_2023-11-22_17-32-10.png (60.98 KiB) Viewed 2233 times

Code: Select all

OS: Ubuntu 20.04.6 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2023.1102.0.14555 (Git shallow) AppImage
Build type: Release
Branch: HEAD
Hash: 53783b6707f2fd2d561a02b5542f4fbe3c1eda4a
Python 3.11.6, Qt 5.15.8, Coin 4.0.1, Vtk 9.2.5, OCC 7.7.2
Locale: German/Germany (de_DE)
Installed mods: 
  * boltsfc 2022.11.5
  * Curves 0.6.14
  * lattice2 1.0.0