yes the test is based on comparison : version+date macro and version+date page wiki
for the official version
PS:vous serez averti par la macro dés son lancement (normalement)
mario
yes the test is based on comparison : version+date macro and version+date page wiki
for the official version
Code: Select all
OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of FreeCAD: 64-bit
Version: 0.20.2.29603 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: 930dd9a76203a3260b1e6256c70c1c3cad8c5cb8
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.3
Locale: German/Germany (de_DE)
Installed mods:
* Curves 0.6.9
* fasteners 0.4.56
* freecad.gears 1.0.0
* kicadStepUpMod 10.19.4
* Manipulator 1.5.0
* sheetmetal 0.2.63
no this is the good place
yes the xyz point 0 is centered on center screen and if you led is 10 mm over this point (and rotate -10 below) , the led is moved with the screen
mmm thanks, i have one other similar macro
no the macro round the value to degrees , you want work with decimal value ?