Hi here,
Please help me with Lamp Shade Frame.
I have hoop and stick and then using Polar Pattern I duplicate stick 3 times.
The issue I have is shown on the picture. You can also see my FreeCAD file in the attachment.
Please advise how to fix this defect.
Thank you,
Vitaliy
Additive pipes overlapping issue
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Additive pipes overlapping issue
Reduce values theses 2 parameters, could give a better display.
- Attachments
-
- Capture.JPG (31.25 KiB) Viewed 547 times
- Shalmeneser
- Veteran
- Posts: 9560
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Additive pipes overlapping issue
Part_CheckGeometry shows no problem.
* You can try to modify the quality of visualiazation : Body > View > Angular Deflection -or- Deviation
* I would do the circle with PartDesign_Revolution
* I would avoid coplanarity with different radius for circle and line
* I would attach the circle to the line (to be normal and create a perfect cylinder).
but any of these modification provide a perfect solution.
* You can try to modify the quality of visualiazation : Body > View > Angular Deflection -or- Deviation
* I would do the circle with PartDesign_Revolution
* I would avoid coplanarity with different radius for circle and line
* I would attach the circle to the line (to be normal and create a perfect cylinder).
but any of these modification provide a perfect solution.
- Attachments
-
- lamp_SHALM.FCStd
- (67.77 KiB) Downloaded 8 times
- thomas-neemann
- Veteran
- Posts: 11919
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Additive pipes overlapping issue
Many thanks for help and additional recommendations.
Great tool with awesome community!
Great tool with awesome community!