Stepover on Profile Op?
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
-
- Posts: 107
- Joined: Tue Feb 21, 2023 9:30 pm
Re: Stepover on Profile Op?
At line 328 in MultiProfile.py file the Active state of the operation is switched to False.
Re: Stepover on Profile Op?
Morning FreeCADers.
Peace and blessings,
Russell
Some positive progress on this front, screenshot 2. But, not without bugs for opposite cut direction, screenshot 1. Think the bug has to do with orientation of edges, so "back to the drawing board." Other side effects of multi-profile tag support will require a boolean toggle to enable/disable the feature due to misinterpretations of profile paths containing multiple models. Another bug/fault pertains to the GUI task panel Auto Generate feature, but his is a minor issue in my list.
Thanks for mentioning this.Dimitrios2 wrote: ↑Tue May 16, 2023 12:22 am At line 328 in MultiProfile.py file the Active state of the operation is switched to False.
Peace and blessings,
Russell
Code: Select all
OS: Windows 10 build 19045
Word size of FreeCAD: 64-bit
Version: 0.21.0.33303 (Git)
Build type: Release
Branch: master
Hash: 5b075a9938b78076fdde9034de4a05685e42690e
Python 3.8.16, Qt 5.15.8, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: English/United States (en_US)
Installed mods:
* FC_SU
* freecad.gears 1.0.0
* PathExp
* Z_MacroStartup
- Attachments
-
- trash_B.FCStd
- Source file for screenshots
- (56.59 KiB) Downloaded 30 times
-
- Bug in CCW profile direction.
- Snip macro screenshot-5fbc47.png (157.34 KiB) Viewed 1070 times
-
- Good result in CW profile direction.
- Snip macro screenshot-ad7525.png (154.84 KiB) Viewed 1070 times
-
- Posts: 107
- Joined: Tue Feb 21, 2023 9:30 pm
Re: Stepover on Profile Op?
That is awesome!
Please do me a favour before trying to fix anything, copy the profile op, change direction, add a new macro as is and try your code once again. The start and end points of the arc are correct, although you are getting a G3 instead of G2 or vice versa. That looks like a cache issue on the macro side.
Please do me a favour before trying to fix anything, copy the profile op, change direction, add a new macro as is and try your code once again. The start and end points of the arc are correct, although you are getting a G3 instead of G2 or vice versa. That looks like a cache issue on the macro side.
Re: Stepover on Profile Op?
Hello @Russ4262
i just used your macro and the problem mentioned in this post:
I have changed this myself so it is working for me but for new users this could be not so funny
i just used your macro and the problem mentioned in this post:
is present in the current file from your inital post of the multiprofile macro. Is there a other location with an up to date version of the macro?Dimitrios2 wrote: ↑Tue May 16, 2023 12:22 am At line 328 in MultiProfile.py file the Active state of the operation is switched to False.
I have changed this myself so it is working for me but for new users this could be not so funny