Greetings to the Community!
Here the topic viewtopic.php?p=682457#p682457 which highlighted the problem, could some of the developers kindly investigate?
Problems or bugs in the "Scale" function of Draft
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Problems or bugs in the "Scale" function of Draft
This is not the place to discuss errors, unless you are fixing things yourself. Create a ticket instead.domad wrote: ↑Wed May 17, 2023 5:39 am Here the topic viewtopic.php?p=682457#p682457 which highlighted the problem, could some of the developers kindly investigate?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Problems or bugs in the "Scale" function of Draft
@domad I can't reproduce what you describe in the linked message. If you want to scale a solid you have to check the Clone checkbox. If you don't no new object is created and there is a message in the report view. It does not matter if the scaling is uniform or not.
Your problem may be related to:
viewtopic.php?t=77612&start=10#p682038
Can you upgrade an try again?
Your problem may be related to:
viewtopic.php?t=77612&start=10#p682038
Can you upgrade an try again?
Code: Select all
OS: Windows 8.1 Version 6.3 (Build 9600)
Word size of FreeCAD: 64-bit
Version: 0.21.0.33175 (Git)
Build type: Release
Branch: master
Hash: c4a6b3a017469f7bd2c20dce44ac1264155a8488
Python 3.10.11, Qt 5.15.8, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: C/Default (C) [ OS: Dutch/Netherlands (nl_NL) ]
Installed mods:
Re: Problems or bugs in the "Scale" function of Draft
You are right, it belongs here; @domad, sorry for the confusion (I would have bet it was in the developer forum ). In fact, a moderator should have moved the original topic here.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Problems or bugs in the "Scale" function of Draft
Hello @Roy_043, greetings to the Community!
Certainly the "create clone" box must be selected, but now try setting different scaling parameters for "x", "y" and "z", you will see that in the updated/preview view it seems to work, but a clone is created on confirmation identical to the original (i.e. not scaled).
The "not scaled" clone with the error icon is displayed in the "Tree view";
now open the properties and try to set the scaling parameters from there:
- if you set a unique scaling (equal values for "x", "y" and "z") then the operation is successful
- if instead you set unequal values (even for just one axis) Fc signals the error and does not complete the scaling operation.
Note that the scaling parameter "uniform scaling" or "uneven" is not present among the parameters of the "Data" tab.
I don't know if I was clear in describing the problem, @Roy_043 if you think it's appropriate I can make an animated gif.
Thanks @Roy_043 for having "refocused" @chrisb whom I thank for the kindness shown (post scriptum I understood that you had gone into a "balloon / confusion").
Re: Problems or bugs in the "Scale" function of Draft
Greetings to the Community!
@Roy_043 thanks for the information, the weekly-builds-33175-conda for Linux is not yet available, but I have no doubt that the problem is solved.