绘制了一个模型,需要对模型的边执行倒斜角,选中了边线之后,点击倒斜角按钮,FreeCAD报错,无法执行。请问这个问题的原因是什么?
电脑的操作系统:Windows10 22H2 简体中文版
FreeCAD版本:0.20.2 Portable
模型文件请查看附件My3DModel.7z
FreeCAD0.20.2倒斜角失败
Moderator: paullee
Forum rules
论坛规矩 / 論壇規矩 , 有用的资讯 / 有用的資訊
论坛规矩 / 論壇規矩 , 有用的资讯 / 有用的資訊
- Fireflying
- Posts: 9
- Joined: Wed Apr 19, 2023 3:40 am
Re: FreeCAD0.20.2倒斜角失败
不要附加备份文件。
不要压缩 FreeCAD 文件,它们已经被压缩了。 您的 7zip 文件比其中的 FreeCAD 文件大。
使所有过渡相切,Chamfer 将起作用:
-------
Don't attach backup files.
Don't compress FreeCAD files, they are already compressed. Your 7zip file is bigger than the FreeCAD file in it.
Make all transitions tangent and Chamfer will work:
不要压缩 FreeCAD 文件,它们已经被压缩了。 您的 7zip 文件比其中的 FreeCAD 文件大。
使所有过渡相切,Chamfer 将起作用:
-------
Don't attach backup files.
Don't compress FreeCAD files, they are already compressed. Your 7zip file is bigger than the FreeCAD file in it.
Make all transitions tangent and Chamfer will work:
- Attachments
-
- Trocola_cb.FCStd
- (19.82 KiB) Downloaded 87 times
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- Fireflying
- Posts: 9
- Joined: Wed Apr 19, 2023 3:40 am
Re: FreeCAD0.20.2倒斜角失败
感谢解答!chrisb wrote: ↑Mon May 01, 2023 6:15 am 不要附加备份文件。
不要压缩 FreeCAD 文件,它们已经被压缩了。 您的 7zip 文件比其中的 FreeCAD 文件大。
使所有过渡相切,Chamfer 将起作用:
-------
Don't attach backup files.
Don't compress FreeCAD files, they are already compressed. Your 7zip file is bigger than the FreeCAD file in it.
Make all transitions tangent and Chamfer will work:
Snip macro screenshot-7c07e1.png
我发现您的文件并不是我上传的文件,我用您的fcstd文件可以完成倒斜角,但是我使用我自己的文件,仍然无法完成倒斜角,无论我怎么选择过渡边都会报错失败。所以这个问题仍然没有解决。请您用我这个文件试试?
Re: FreeCAD0.20.2倒斜角失败
你看起来就像以前一样。你必须在这三个选定的点上创建切线:
------
Your looks just like before. You have to create tangents in these three selected points:
------
Your looks just like before. You have to create tangents in these three selected points:
- Attachments
-
- Snip macro screenshot-bcc55b.png (5.74 KiB) Viewed 5874 times
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: FreeCAD0.20.2倒斜角失败
感謝@chrisb
試了一下,看來沒有問題。
試了一下,看來沒有問題。
- Fireflying
- Posts: 9
- Joined: Wed Apr 19, 2023 3:40 am