Code: Select all
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.21.0.32457 (Git)
Build type: Release
Branch: master
Hash: 85216bd12730bbc4c3cbf8f0bc50416ab1556cbb
Python 3.10.9, Qt 5.15.8, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: C/Default (C)
Installed mods:
* Behave-Dark-Colors 0.1.1
* CurvedShapes 1.0.4
* Help 1.0.3
* Assembly4 0.12.3
editor. But far from it, you have to be content with 2 decimal places.
. .
I put up with this until I discovered the reprehensible bug inherent in the Assembly 4 system. For in the view
. .
there was indeed the possibility to enter the values with the corresponding accuracy. The nasty part of the story is that if you have to switch back to the editor "Place linked Part" because you forgot a rotation, the previously set accuracies are lost.
The demand must therefore be that Assembly 4 adopts the settings in the FreeCAD system and does not make any changes to the data entered elsewhere. The demand for more decimal places is not exaggerated. After all, when dealing with small objects in the range of 1 to 2 inches, 2 decimal places are completely out of the question; 1 mm expressed in inches already has the value of 0.03975 inches. The value of 1/10 mm can no longer be expressed in inches.