Help understanding CONSOLE ERRORS
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Help understanding CONSOLE ERRORS
Trying to understand some of the console errors i get. any help is appreciated
could not attach Project file: exceeds 1 mb limit.
could not attach Project file: exceeds 1 mb limit.
- Attachments
-
- FREECAD ERRORS.pdf
- (91.86 KiB) Downloaded 16 times
- Shalmeneser
- Veteran
- Posts: 9560
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Help understanding CONSOLE ERRORS
Please, never provide a pdf with just a picture : provide directly the picture which will be directly visible in the forum.
You can write less letters in each ShapeString -> file will be lighter.
You can write less letters in each ShapeString -> file will be lighter.
- Attachments
-
- Capture d’écran 2023-04-01 004954.jpg (81.35 KiB) Viewed 600 times
Re: Help understanding CONSOLE ERRORS
Please attach the error output in code tags directly to the post above: easier to read, and especially on my mobile pdfs are always a hassle.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Help understanding CONSOLE ERRORS
Ooooh i underStand, sorry for pdf. I will try characters In shape string to limit size of project. Will provide project file
Thankx
Thankx
Re: Help understanding CONSOLE ERRORS
You get the out of scope message when you cross the body border in an unallowed way. Here you must not apply the Part cut to a pad, apply it to the whole body.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Help understanding CONSOLE ERRORS
Here is the project file. Delete most of the text chars to reduce the file size.
- Attachments
-
- Drum Badge 1.FCStd
- (209.88 KiB) Downloaded 9 times
Re: Help understanding CONSOLE ERRORS
Re: Help understanding CONSOLE ERRORS
You got the quotes wrong.
Select the body in the tree, not in 3D view
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Help understanding CONSOLE ERRORS
sorry chris. I do select from the tree view. what am i not understanding?
Re: Help understanding CONSOLE ERRORS
I'm extremely sure that you didn't. Your tree looks like this: You must have selected the Pad to be cut, I see no other possibility for it to be there.
This is how it works
- Remove your Cut
- Select first the Body and then the Fusion: - create a Part->Cut:
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.