Error when attempting to use Polar Pattern Feature

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Bance
Veteran
Posts: 4163
Joined: Wed Feb 11, 2015 3:00 pm
Location: London

Re: Error when attempting to use Polar Pattern Feature

Post by Bance »

thomas-neemann wrote: Fri Mar 31, 2023 2:27 pm why does sketch002 work in partdesign and not in part?
There is a point in the sketch that is not construction.......
User avatar
thomas-neemann
Veteran
Posts: 11729
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Error when attempting to use Polar Pattern Feature

Post by thomas-neemann »

Bance wrote: Fri Mar 31, 2023 3:37 pm ...


Thanks for the tip, I'll test it
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
papyblaise
Veteran
Posts: 7793
Joined: Thu Jun 13, 2019 4:28 pm
Location: France

Re: Error when attempting to use Polar Pattern Feature

Post by papyblaise »

there is a stupid point 6 which blocks the rotation (and the Pad)
What is this construction line forest for
Attachments
stupide point6.JPG
stupide point6.JPG (22.29 KiB) Viewed 405 times
stupide point6.FCStd
(14.51 KiB) Downloaded 3 times
User avatar
thomas-neemann
Veteran
Posts: 11729
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Error when attempting to use Polar Pattern Feature

Post by thomas-neemann »

papyblaise wrote: Fri Mar 31, 2023 3:41 pm ...
Bance wrote: Fri Mar 31, 2023 3:37 pm ...
that was it. thanks. i am wondering because a new sketch with point can be extruded


edit

I made a mistake when testing. points in the sketcher are construction points. my switch has caused the opposite of what I thought. but it is also the case here that partdesign can extrude it
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
Bance
Veteran
Posts: 4163
Joined: Wed Feb 11, 2015 3:00 pm
Location: London

Re: Error when attempting to use Polar Pattern Feature

Post by Bance »

A point on its own will extrude to a line, a point in a sketch with a closed wire throws an error if it is not construction.
Attachments
1621Point.FCStd
(8.91 KiB) Downloaded 4 times
User avatar
thomas-neemann
Veteran
Posts: 11729
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Error when attempting to use Polar Pattern Feature

Post by thomas-neemann »

Bance wrote: Fri Mar 31, 2023 3:48 pm A point on its own will extrude to a line, a point in a sketch with a closed wire throws an error if it is not construction.
Thanks for the info. but there seems to be a difference if it is extruded in part or partdesign
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
papyblaise
Veteran
Posts: 7793
Joined: Thu Jun 13, 2019 4:28 pm
Location: France

Re: Error when attempting to use Polar Pattern Feature

Post by papyblaise »

yes because with PartDesign it tries to extrude 2 superimposed objects, which is strictly forbidden
but why this ton of construction lines
User avatar
thomas-neemann
Veteran
Posts: 11729
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Error when attempting to use Polar Pattern Feature

Post by thomas-neemann »

papyblaise wrote: Fri Mar 31, 2023 3:57 pm ...
thanks, but this is confusing to me
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
domad
Veteran
Posts: 2029
Joined: Mon Jun 22, 2020 12:16 pm

Re: Error when attempting to use Polar Pattern Feature

Post by domad »

Greetings to the Community!
The gif shows the point that generates the error (as already highlighted in the previous interventions), if we try to create a solid the error will always be signaled because we will not have a closed polyline/wire, this also happens if the point is finds above a line of the sketch that generates the solid.
If instead we create a ruled surface then everything works in fact the point is extruded in line and the sketch as a ruled surface.
Attachments
Error 1624 and 1709.gif
Error 1624 and 1709.gif (231.61 KiB) Viewed 320 times
Error 1624 and 1709.png
Error 1624 and 1709.png (83.59 KiB) Viewed 320 times
User avatar
thomas-neemann
Veteran
Posts: 11729
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Error when attempting to use Polar Pattern Feature

Post by thomas-neemann »

domad wrote: Fri Mar 31, 2023 6:05 pm ...
I understand that, but why does it work despite the point in partdesign?
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
Post Reply