Can't fuse in 1 object
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 44
- Joined: Tue Mar 14, 2023 12:11 pm
Re: Can't fuse in 1 object
SO I have pocked Inscape made auto smoothing on path, and able make chamfer and fuse it with no visible issue but when I try do path it's behave weirdly. and free cad file more than 1mb
Re: Can't fuse in 1 object
Try to reduce the file so that the issue still shows. Or upload it to a publicly available fileservice.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 44
- Joined: Tue Mar 14, 2023 12:11 pm
Re: Can't fuse in 1 object
I hope google drive will do
https://drive.google.com/file/d/15EdP0l ... sp=sharing
https://drive.google.com/file/d/15EdP0l ... sp=sharing
Re: Can't fuse in 1 object
Whatever weirdly means .
It looks ok here:
- Attachments
-
- SnipScreenshot-087f7d.png (50.26 KiB) Viewed 321 times
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 44
- Joined: Tue Mar 14, 2023 12:11 pm
Re: Can't fuse in 1 object
Here pocket3D behavior path
- Attachments
-
- Wierd3Dpocket.jpg (477.82 KiB) Viewed 275 times
Re: Can't fuse in 1 object
Hm, that doesn't look particularly weird to me. Please keep in mind that we don't sit in fromt of your computer, we don't see what you see, and even less we know exactly what you do and what you finally want.
If you want more help, give us more information and e.g. a preferably simple file showing your issue.
If you want more help, give us more information and e.g. a preferably simple file showing your issue.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 44
- Joined: Tue Mar 14, 2023 12:11 pm
Re: Can't fuse in 1 object
Green lines it's path for cutting right ? so it will just cuts 5mm of fused surface after it's finished cut chamfer, on your screenshot there are no green path where I see it in 3Dpocket on my screen