@akredd, how did you align the object before adding the projection group?
[solved] TechDraw Center lines not created/shown for holes
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: TechDraw Center lines not created/shown for holes
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: TechDraw Center lines not created/shown for holes
Hi, to all helped here.
That was it. My next question was solved before i can ask I got a problem with a section that was not properly shown. The same thing, a "-" in Section Normal. But i didn't get any idea how that "-" come in the Data. I'm shure i didn't change that... In the Future i will have a glance on that.
Thanks to all and regards
Andreas
Re: TechDraw Center lines not created/shown for holes
That works here out of the box. So it's probably a rounding issue depending on the hardware (my version is only slightly older than yours).
Code: Select all
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.21.0.32532 (Git)
Build type: Release
Branch: master
Hash: 20e44eba50e1365b9e7bb9c5c244afe96a627a28
Python 3.10.10, Qt 5.15.8, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: C/Default (C)
Installed mods:
* FC_SU
* DynamicData 2.46.0
* freecad.gears 1.0.0
* FeedsAndSpeeds 0.5.0
* dxf-library
* fcgear 1.0.0
* fasteners 0.4.54
* sheetmetal 0.2.62
* ExplodedAssembly
* Curves 0.6.8
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: TechDraw Center lines not created/shown for holes
Ok, now i know where i have to look for...
Thanks again.
Regards
Andreas
Thanks again.
Regards
Andreas