Use European standard in switzerland

About the development of the FEM module/workbench.

Moderator: bernd

thschrader
Veteran
Posts: 3129
Joined: Sat May 20, 2017 12:06 pm
Location: Germany

Re: Use European standard in switzerland

Post by thschrader »

vsharma.next wrote: Wed Mar 22, 2023 6:08 pm ...
Are you focussed ONLY on antennas or can you design steel structures / frames :) ? you want to ? :D :D
We are focussed on antenna structures, but we have to do all kinds of statics stuff.
When using existing buildings/structures for mounting antenna masts, we often have to recalculate
the existing structure. Which is time consuming, especially when there are only bad ore none old building plans.
Thats why we are interested in using photogrammetry. The second picture is a (very dense) point cloud
with the reconstructed steel structure. Reconstruction done by hand. The point cloud was taken with a iPhone 13pro (with lidar sensor)
and processed on the pix4d-server:
https://www.pix4d.com/de/

Regards Thomas
new_antenna_mast.JPG
new_antenna_mast.JPG (71.85 KiB) Viewed 366 times
mast_from_pointcloud.JPG
mast_from_pointcloud.JPG (69.15 KiB) Viewed 366 times
Post Reply