I just set up a millface operation. I misses the face by 0.6mm.
The actual face selected is at 56.326mm. OpFinalDepth shows 56.33mm ( rounding up to 2dp it seems ). However, the lowest path is at 56.826mm, ie 0.5mm above the model face.
I set Finish Step Down to 0.5mm , I get the smaller final cut but it misses.
If this is not me being forgetful please move to Path forum as a bug.
Yep, this looks like a new bug. If I set last cut to 0.75, it stops 0.75 above that face; Finish Step Down to 0 ends at last full step.
Who has been poking and not testing?
TIA
recent master:
Code: Select all
OS: Fedora Linux 36 (Thirty Six) (LXQt/lxqt)
Word size of FreeCAD: 64-bit
Version: 0.21.0.32323 (Git)
Build type: Release
Branch: master
Hash: 5ac308e8a65c7022ef851463d8ab5e1ba4b5edbe
Python 3.10.10, Qt 5.15.8, Coin 4.0.0, Vtk , OCC 7.6.3
Locale: English/United Kingdom (en_GB)
Installed mods:
* FreeCAD_Assembly4 0.11.10
* FreeCAD_assembly3