Code: Select all
G0 X-12.000 Y-10.001
G0 Z60.000
(G83 X-12.000 Y-10.001 Z16.000 F120.000 Q3.750 R54.000)
G0 X-12.000 Y-10.001
G1 Z56.250 F120.00
G0 Z60.000
G0 Z56.438
G1 Z52.500 F120.00
G0 Z60.000
G0 Z52.688
G1 Z48.750 F120.00
G0 Z60.000
G0 Z48.938
Code: Select all
(5mmDrilling135)
(Begin Drilling)
G0 F0.000000 Z90.409167
G90
G98
G0 F0.000000 X-12.000000 Y-10.001000
G0 F0.000000 Z60.000000
G83 F2.000000 Q3.750000 R54.000000 X-12.000000 Y-10.001000 Z16.000000
G0 F0.000000 X-174.000000 Y-10.001000
G0 F0.000000 Z60.000000
G83 F2.000000 Q3.750000 R54.000000 X-174.000000 Y-10.001000 Z16.000000
G80
G0 F0.000000 Z78.409167
G0 Z90.409167
http://www.solaire-chauffe-eau.info/cnc ... pecker.mp4
In this clip , see the retract height is just out of the work then, right at the end, it moves to higher Z to go to next hole.