See viewtopic.php?t=76795 .
[Sketcher] Distance to circle
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: [Sketcher] Distance to circle
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- adrianinsaval
- Veteran
- Posts: 5551
- Joined: Thu Apr 05, 2018 5:15 pm
Re: [Sketcher] Distance to circle
tldr: build system still broken, the "new" builds that are uploaded are just the same reuploaded.
Re: [Sketcher] Distance to circle
yes, only the date is changing but the build is always the same, moreover the version for py3.10 is still older ... 31197 dated 16 February
Re: [Sketcher] Distance to circle
I just tested circle to circle distance. It works well!
Canit be extended to arcs as well? Like tangency or point-on-object it should work as if it was a full circle, so hopefully it is not too much effort.
Canit be extended to arcs as well? Like tangency or point-on-object it should work as if it was a full circle, so hopefully it is not too much effort.
Do you plan to integrate this into 0.21? I want to include this new constraint into my sketcher lecture, and it would of course be less effort, if I could change it all at once.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: [Sketcher] Distance to circle
Hi @chrisb ,
Distance to Arc is here : https://github.com/FreeCAD/FreeCAD/pull/9166
and Circle to Line here : https://github.com/FreeCAD/FreeCAD/pull/9044
Distance to Arc is here : https://github.com/FreeCAD/FreeCAD/pull/9166
and Circle to Line here : https://github.com/FreeCAD/FreeCAD/pull/9044
Re: [Sketcher] Distance to circle
Thanks @flachyjoe, I will describe it in the document hoping that it will make it into 0.21.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: [Sketcher] Distance to circle
Hi @flachyjoe,
I've noticed that the newly implemented circle to circle distance constraint doesn't work when one of the circles is an external geometry:
Is that a known limitation ?
I've noticed that the newly implemented circle to circle distance constraint doesn't work when one of the circles is an external geometry:
Is that a known limitation ?