[Feature Request]: ISO shaft/hole tolerances for dimensions

[david69]

there are artwork guidelines to follow:
https://wiki.freecad.org/Artwork_Guidelines

here the master page for all the icons
https://wiki.freecad.org/Artwork

[maker]

My icon proposal:
...

Apart from the fact that the color selection is totally off, perhaps one can still accommodate a few additional informations on the surface of 64 x 64 pixel for the surely very soon award winning proposal...

Irony off

The suggestion of @wandererfan to the icon of the little girl and the 3 bears had something.
We could also possibly form a circle of chairs...

.

[wandererfan]

Best I can do until the art department arrives...

shaftTolerance.png (4.42 KiB) Viewed 1258 times

[maker]

@wandererfan

Looks great.
Brings it to the point in a minimalistic way.
This is how it should be.

[user1234]

I just want to note, that ISO tolerances is not only for shafts, holes and round objects, it is also for not round objects, like eg. keying.


Greetings
user1234

[edi]

The above published macro HoleShaftFitISO286.FCMacro has been merged as a command to the master. It will be available in the next weekly version. Documentation see:
https://wiki.freecad.org/TechDraw_HoleShaftFit
Thanks to all who helped.

[NewJoker]

The above published macro HoleShaftFitISO286.FCMacro has been merged as a command to the master. It will be available in the next weekly version. Documentation see:
https://wiki.freecad.org/TechDraw_HoleShaftFit
Thanks to all who helped.

Great news, I allowed myself to add this to the release notes.

[Piero69]

@edi

Did you see my remark?

the upper deviation should be aligned to left not to right compared to lower one (see attachment and look at dimensions H7 and h7)
[/quote]

[edi]

Did you see my remark?

Solved an merged into the master. Will be available in the next weekly version.

Zero tolerance values will be displayed as: (+0.000)

[CPF78]

Hi All!

im a Newbie, and i have a quick question,
i cant seem to find either the Shaft/Hole tool or the surface tool in the Techdraw Workbench

i have version 20.2

thank you in advance

regards