the upper deviation should be aligned to left not to right compared to lower one (see attachment)edi wrote: ↑Fri Sep 23, 2022 1:19 pm Find attached the first version of a macro creating shaft/hole tolerances using ISO 286.
The macro uses some of the preferentially recommended fields, shown in tables 12 and 13 of ISO 286, https://docplayer.org/55190189-Deutsche ... 286-1.html
TaskHoleShaftFitISO286.ui
HoleShaftFitISO286.FCMacro
Installation: Copy the two files TaskHoleShaftFitISO286.ui and HoleShaftFitISO286.FCMacro into your macros holding directory.
Workflow:
- open a TechDraw drawing.
- select one distance dimensioning (horizontal, vertical or oblique) or one circle diameter dimensioning.
- start the macro. A panel opens in the Combo View.
- select shaft fit / hole fit to show whether your dimensioning refers to a shaft or a hole.
- select the desired ISO 286 fit field using the combo box. The partner field and the fit type (loose, snug, press) is shown.
- click the OK button.
HoleShaftFit01.png
The label of the selected field and the calculated tolerance values are shown in the drawing.
Please test the macro and give me feedback.
[Feature Request]: ISO shaft/hole tolerances for dimensions
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
- Attachments
-
- Tolerance.jpg (174.52 KiB) Viewed 1535 times
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
@wandererfan
this macro should be implemented as a tool in TD, what do you think?
this macro should be implemented as a tool in TD, what do you think?
- wandererfan
- Veteran
- Posts: 6309
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
I will try to implement this this tool, but I will need some time.
To everybody: Please checkout the several combinations, and give me feedback if there are returned improper numbers.
To everybody: Please checkout the several combinations, and give me feedback if there are returned improper numbers.
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
Has anybody a proposal for an icon to represent the shaft/hole tolerances tool ?
Please post here as 64x64 pixel svg. No characters or numbers allowed in the icon!
Please post here as 64x64 pixel svg. No characters or numbers allowed in the icon!
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
My proposal for an icon for engineering fit:
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
@NewJoker
You killingjoke...
I am curious how edi wants to get this solved, so that an unambiguous logo comes out. LOL
You killingjoke...
I am curious how edi wants to get this solved, so that an unambiguous logo comes out. LOL
- wandererfan
- Veteran
- Posts: 6309
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
"This one is too big. And this one is too small. But this one is just right". https://en.wikipedia.org/wiki/Goldiloc ... hree_Bears
If I had any artistic skill, I would make an icon of a little girl and three bears to go with dolly the sheep.
If I had any artistic skill, I would make an icon of a little girl and three bears to go with dolly the sheep.
Re: [Feature Request]: ISO shaft/hole tolerances for dimensions
My icon proposal:
I plan to place the icon in the Annotation group, next to SurfaceFinishSymbols.