Code: Select all
OS: KDE Flatpak runtime (XFCE/xfce)
Word size of FreeCAD: 64-bit
Version: 0.20.1.29410 (Git)
Build type: Release
Branch: (HEAD detached at 0.20.1)
Hash: f5d13554ecc7a456fb6e970568ae5c74ba727563
Python 3.9.9, Qt 5.15.5, Coin 4.0.0, Vtk 8.2.0, OCC 7.6.2
Locale: English/United States (en_US)
Installed mods:
* Help 1.0.3
* Assembly4 0.12.4
It's may be obvious, but this snapshot is of an assembly put together in the Assembly4 workbench. The parts were all modeled in separate files.
The red arrows show the vertical columns on the back wall the bottom plane of the roof should rest upon, the green arrow shows a point in the corner 200" above the floor at the peak of the roof and the orange line approximately traces the line at which I believe the plane would intersect the four back walls of the stalls and the side wall of the fifth stall.
My question is what tools in FreeCAD would be best suited to establishing this plane, perhaps as a datum plane(?) and then building a roof structure off of it? The structure needn't be much more that a hollow wedge, but the shape needs to be correct to fit into the nooks at the walls and to get the slope correct.
Any help will be greatly appreciated.
Bill Lugg