how to design louvers (louvres)?

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
User avatar
BartR
Posts: 256
Joined: Tue Aug 10, 2021 10:59 am

how to design louvers (louvres)?

Post by BartR »

I did it quite quickly on Fusion360, but on FreeCAD I stuck

Please, here the Louvres I mean:
https://www.grainger.com/product/HOFFMA ... ame-32FL30
Last edited by BartR on Wed Jan 18, 2023 11:50 am, edited 2 times in total.
______________
Bart R.
drmacro
Veteran
Posts: 8865
Joined: Sun Mar 02, 2014 4:35 pm

Re: how to design louvres?

Post by drmacro »

BartR wrote: Wed Jan 18, 2023 11:10 am I did it quite quickly on Fusion360, but on FreeCAD I stuck

Please, here the Louvres I mean:
https://www.grainger.com/product/HOFFMA ... ame-32FL30
Hmm...maybe the forming tool in the Sheetmetal workbench?
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
User avatar
papyblaise
Veteran
Posts: 7870
Joined: Thu Jun 13, 2019 4:28 pm
Location: France

Re: how to design louvres?

Post by papyblaise »

you disperse a lot :!: , have you finished your microphone :?:
Go do a search in my post, I made some a few weeks ago under the name "persienne" in French

Edit : I find it
https://forum.freecadweb.org/viewtopic. ... ne#p526821
Last edited by papyblaise on Wed Jan 18, 2023 12:13 pm, edited 1 time in total.
User avatar
BartR
Posts: 256
Joined: Tue Aug 10, 2021 10:59 am

Re: how to design louvres?

Post by BartR »

papyblaise wrote: Wed Jan 18, 2023 11:31 am you disperse a lot :!: , have you finished your microphone :?:
Go do a search in my post, I made some a few weeks ago under the name "persienne" in French
hahaha the grid is not yet finished. It's very laborious making the small pipes by hand. I updated the post this morning :-)

I check immediately for your topic "persienne"
______________
Bart R.
User avatar
BartR
Posts: 256
Joined: Tue Aug 10, 2021 10:59 am

Re: how to design louvers (louvres)?

Post by BartR »

Shalmeneser wrote: Wed Jan 18, 2023 6:39 pm SheetMetal_Forming
Thank you :-)
______________
Bart R.
Post Reply