Thank you for your help and Freecad
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
-
- Posts: 14
- Joined: Mon Jan 04, 2021 11:55 am
Thank you for your help and Freecad
Just to say thank you for the support that I have received for the one or two issues I have encountered with FC from this forum. I feel as if I'm over the initial hump of the learning curve and look forward to the future. I attach a couple of practice pieces.
- Attachments
-
- practice_pieces1.jpg (110.02 KiB) Viewed 4878 times
Re: Thank you for your help and Freecad
Looks really cool
All 3 pieces 3d printed ?
All 3 pieces 3d printed ?
-
- Posts: 14
- Joined: Mon Jan 04, 2021 11:55 am
Re: Thank you for your help and Freecad
This is a 10 second Blender Cycles render. The edge reflection is achieved by using a 'cheat' Bevel shader.
Re: Thank you for your help and Freecad
I really need to check Blender Cycles later again
10 seconds render, can make a 3 min tutorials ?
Thanks.
10 seconds render, can make a 3 min tutorials ?
Thanks.
Re: Thank you for your help and Freecad
Awesome! Could you also attach some screenshots of the models in FreeCAD ? Also please paste your full About info in the OP (with the additional screenshots please!) thanks!snoutbrowser wrote: ↑Wed Oct 13, 2021 8:10 am Just to say thank you for the support that I have received for the one or two issues I have encountered with FC from this forum. I feel as if I'm over the initial hump of the learning curve and look forward to the future. I attach a couple of practice pieces.
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs