re Help Instruction ----re FreeCad 0.19 ------I have been using FreeCad for approx 6 months with no problems. This seems crazy, but for some reason I have lost the ability when I am in the sketch mode to be able to draw lines, circles etc. When in the sketch mode and I go to the screen to draw my sketch the curser is showing the xy coordinates but not the line circle etc. I have no idea as to why I am in this predicament.
......Please Help if you can....Thanks..Don Fischer (email discarded by chrisb)
Sketching Problem
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
-
donaldkfischer
- Posts: 1
- Joined: Wed Jun 16, 2021 1:25 am
Re: Sketching Problem
Hi and welcome to the forum!
I have discarded your email adress due to spam danger. If you are aware of the consequences you can edit your post above and anter it again.
Please attach your full FreeCAD info as described in the IMPORTANT forum rules linked above. If you have a very old version the issue may be caused by an invisible body.
I have discarded your email adress due to spam danger. If you are aware of the consequences you can edit your post above and anter it again.
Please attach your full FreeCAD info as described in the IMPORTANT forum rules linked above. If you have a very old version the issue may be caused by an invisible body.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.