It is best if the image is directly uploaded and Attached to the message rather than any kind of Link.
Gene
Yes the documentation for custom shapes is here: https://github.com/mnesarco/MarzWorkben ... tom-ShapesNCG wrote: ↑Thu Dec 29, 2022 4:39 pm
I groped through the Inkscape design drawings and discovered that they're linked to FreeCAD using labels, because I edited the script for the headstock logo in Inkscape and observed it automatically updating in FreeCAD. I also observed that the numbers in the pocket labels seem to be measurements for depth of cut for pockets. ...cool! I like the parametric features that exist for a project. I'm wondering if there's any documentation/discussion on all this stuff?
Hello!
Can you please provide the FreeCAD error messages after the crash?
It will be great so I can try to reproduce the problem. But also need the parameters that you are using because there are infinite combinations values that can lead to impossible geometries.
Up to here I have no crash. I modified many neck parameters after "create neck". Maybe you can tell me which parameter change causes the crash.Cla' wrote: ↑Wed Aug 23, 2023 3:41 pm No message error, only freecad not responding (blank page) and after 1 minute i get out
tele step-to-step5_crash
Create guitar in freecad
Create fretboard in freecad
Change parameters fretboard
End Margin=12,80mm
End radius=241,3mm
Fret nipping=0
Fret=21 (scale 647,70mm)
Side margin=2mm
Start margin=0
Start radius=241,3mm
Change parameters nut
String distance proj=38,5mm
Change parameters bridge
String distance proj=57,00mm
Import tele-fret-inlays.svg
Save telestyle-fretboard-inlays.FCStd
Create body in freecad
Import in freecad tele-body.svg
Change parameters body
Neck pocket deep =17,54mm
Neck pocket lenght =76,25mm
Create neck in freecad
Change parameters neck in freecad CRASH!!
Code: Select all
OS: Linux Mint 21.2 (X-Cinnamon/cinnamon)
Word size of FreeCAD: 64-bit
Version: 0.21.0.33515 (Git) AppImage
Build type: Release
Branch: master
Hash: 8d87eaac22b844105960f22817f55c8b81d51e60
Python 3.10.12, Qt 5.15.8, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: English/United States (en_US) [ OS: English/United States (en_US) ]
Installed mods:
* Assembly4 0.12.5
* lattice2 1.0.0
* StartupThing
* MnesarcoUtils 0.2.2
* Silk 0.1.3
* fcscript 0.0.1
* Curves 0.6.6
* ProDarkThemePreferencePack 1.0.0
* Marz 0.0.27-alpha
* Woodworking 0.21.30486
Change parameters neckmnesarco wrote: ↑Wed Aug 23, 2023 4:10 pmUp to here I have no crash. I modified many neck parameters after "create neck". Maybe you can tell me which parameter change causes the crash.Cla' wrote: ↑Wed Aug 23, 2023 3:41 pm No message error, only freecad not responding (blank page) and after 1 minute i get out
tele step-to-step5_crash
Create guitar in freecad
Create fretboard in freecad
Change parameters fretboard
End Margin=12,80mm
End radius=241,3mm
Fret nipping=0
Fret=21 (scale 647,70mm)
Side margin=2mm
Start margin=0
Start radius=241,3mm
Change parameters nut
String distance proj=38,5mm
Change parameters bridge
String distance proj=57,00mm
Import tele-fret-inlays.svg
Save telestyle-fretboard-inlays.FCStd
Create body in freecad
Import in freecad tele-body.svg
Change parameters body
Neck pocket deep =17,54mm
Neck pocket lenght =76,25mm
Create neck in freecad
Change parameters neck in freecad CRASH!!
Note that sometimes FreeCAD does not refresh automatically after parameter change (it must be some bug in my code) in that case you can just press Ctrl+R to force a refresh, but this is not a crash.
Also I am running Freecad 0.21 on Linux, so it could be a problem specific to 0.20 on windows.
btw thanks for your detailed report.Code: Select all
OS: Linux Mint 21.2 (X-Cinnamon/cinnamon) Word size of FreeCAD: 64-bit Version: 0.21.0.33515 (Git) AppImage Build type: Release Branch: master Hash: 8d87eaac22b844105960f22817f55c8b81d51e60 Python 3.10.12, Qt 5.15.8, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3 Locale: English/United States (en_US) [ OS: English/United States (en_US) ] Installed mods: * Assembly4 0.12.5 * lattice2 1.0.0 * StartupThing * MnesarcoUtils 0.2.2 * Silk 0.1.3 * fcscript 0.0.1 * Curves 0.6.6 * ProDarkThemePreferencePack 1.0.0 * Marz 0.0.27-alpha * Woodworking 0.21.30486