08:44:42 2.552324 <asm3.main> init_gui.py(14): no solver backend found
09:18:09 <Import> ImportOCAF2.cpp(695): free shape count 1
09:20:18 FreeCAD 0.19, Libs: 2022.709R28846 (Git)
[FreeCAD Console mode <Use Ctrl-Z plus Return to exit.>]
Collecting py-slvs
Downloading py_slvs-1.0.4-cp38-cp38-win_amd64.whl (264 kB)
Installing collected packages: py-slvs
Successfully installed py-slvs-1.0.4
09:20:18 >>> >>> >>> >>> ... ... ...
09:20:18 WARNING: You are using pip version 20.3; however, version 22.2.2 is available.
09:20:18 You should consider upgrading via the 'D:\Downloads\FreeCAD-asm3-Stable-Win64-Py3-Qt5-20220709\bin\FreeCADCmd.exe -m pip install --upgrade pip' command.
09:20:18
09:20:35 Running the Python command 'asm3CmdImportSingle' failed:
Traceback (most recent call last):
File "D:\Downloads\FreeCAD-asm3-Stable-Win64-Py3-Qt5-20220709\Mod\asm3\freecad\asm3\gui.py", line 387, in Activated
filenames = QtGui.QFileDialog.getOpenFileNames(
argument 3 must be str, not NoneRunning the Python command 'asm3CmdImportSingle' failed:
Traceback (most recent call last):
File "D:\Downloads\FreeCAD-asm3-Stable-Win64-Py3-Qt5-20220709\Mod\asm3\freecad\asm3\gui.py", line 387, in Activated
filenames = QtGui.QFileDialog.getOpenFileNames(
argument 3 must be str, not NoneFreeCAD 0.19, Libs: 2022.709R28846 (Git)
[FreeCAD Console mode <Use Ctrl-Z plus Return to exit.>]
Requirement already satisfied: py-slvs in c:\users\michel.ketterle\appdata\roaming\python\python38\site-packages (1.0.4)
09:20:54 >>> >>> >>> >>> ... ... ...
09:20:54 WARNING: You are using pip version 20.3; however, version 22.2.2 is available.
09:20:54 You should consider upgrading via the 'D:\Downloads\FreeCAD-asm3-Stable-Win64-Py3-Qt5-20220709\bin\FreeCADCmd.exe -m pip install --upgrade pip' command.
09:20:54
.\bin\FreeCADCmd.exe -m pip install --upgrade pip
unrecognised option '-m'
Allowed options:
Generic options:
-v [ --version ] Prints version string
-h [ --help ] Prints help message
-c [ --console ] Starts in console mode
--response-file arg Can be specified with '@name', too
--dump-config Dumps configuration
--get-config arg Prints the value of the requested configuration key
Configuration:
-l [ --write-log ] Writes a log file to:
C:\Users\michel.ketterle\AppData\Roaming\FreeCAD\Fr
eeCAD.log
--log-file arg Unlike --write-log this allows logging to an
arbitrary file
-u [ --user-cfg ] arg User config file to load/save user settings
-s [ --system-cfg ] arg System config file to load/save system settings
-t [ --run-test ] arg Test case - or 0 for all
-M [ --module-path ] arg Additional module paths
-P [ --python-path ] arg Additional python paths
--single-instance Allow to run a single instance of the application
use the included python.exe instead of freecadcmd.exe, although I doubt an outdated pip would be the issue, looks like py-slvs got installed but somewhere else there was an error. @realthunder can you weight in?
I can confirm the false negative error is not Windows specific, I just downloaded the stable AppImage and installed solvespace with the same 'error' but on restarting Assembly3 loads fine and the output says that it installed OK.