Additive Pipe fails on path, Link Path Array Works?

Report observations made with the new Toponaming branch.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
Outsourced
Posts: 81
Joined: Wed Feb 03, 2021 8:07 am

Additive Pipe fails on path, Link Path Array Works?

Post by Outsourced »

OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2022.407.28576 (Git)
Build type: Release
Branch: LinkStage3
Hash: 599f7663af69d3dbd77063e834b12f26da513b2d
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/Australia (en_AU)

Hello FC
Please find the file included, https://drive.google.com/file/d/1y89ueB ... sp=sharing
If OCC is able to project a compound 200+ times along a path using link array, It should be able to sweep along that same path using additive pipe -shouldn't it?

I then tried to sweep (A.P) along the individual line segments but I was also greeted with multiple crashes & fails.

I was hoping to experiment with a Rope texture on the surface, mmmm never got that far.

Correction, I did on a previous document but the graphics are messed to which I tried to resolve using Angle deflection & Deviation. But with no success, I;m am just guessing the numbers TBH.
Anyways this is the file with slightly different tree.https://drive.google.com/file/d/1y89ueB ... sp=sharing.

Kind Regards
Clark Kuant
Design Community
https://www.youtube.com/channel/UCTFFPB ... KJBZEhSXBA
chrisb
Veteran
Posts: 53928
Joined: Tue Mar 17, 2015 9:14 am

Re: Additive Pipe fails on path, Link Path Array Works?

Post by chrisb »

A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply