2D Bounding Plane Constraint Not available

A subforum specific to the development of the OpenFoam-based workbenches ( Cfd https://github.com/qingfengxia/Cfd and CfdOF https://github.com/jaheyns/CfdOF )

Moderator: oliveroxtoby

Post Reply
alpatters
Posts: 5
Joined: Mon May 02, 2022 10:10 am

2D Bounding Plane Constraint Not available

Post by alpatters »

Hi,
I'm getting started and running through this tutorial https://www.youtube.com/watch?v=gzDfP9ohJdA on simulating the Karman Vortex.

When I select the back and front faces and set the boundary condition, the tutorial sets the Boundary to "Constraint" and the sub-type to "2D Bounding Plane".
When I set the boundary to "Constraint" the only sub-type in the list is "Symmetry". "2D Bounding Plane" is not in the list.

Is there something I'm missing? Why do I not have a constraint for 2D bounding plane?

OS: Ubuntu 20.04.4 LTS (ubuntu:GNOME/ubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24366 (Git)
Build type: Release
Branch: (HEAD detached at 0f9259c)
Hash: 0f9259cda103ae1824ac16c68ac9b4a0d54b05fc
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: English/United Kingdom (en_GB)
Attachments
Screenshot from 2022-05-02 11-10-47.png
Screenshot from 2022-05-02 11-10-47.png (94 KiB) Viewed 1463 times
User avatar
oliveroxtoby
Posts: 811
Joined: Fri Dec 23, 2016 9:43 am
Location: South Africa

Re: 2D Bounding Plane Constraint Not available

Post by oliveroxtoby »

alpatters wrote: Mon May 02, 2022 10:22 am Hi,
I'm getting started and running through this tutorial https://www.youtube.com/watch?v=gzDfP9ohJdA on simulating the Karman Vortex.

When I select the back and front faces and set the boundary condition, the tutorial sets the Boundary to "Constraint" and the sub-type to "2D Bounding Plane".
When I set the boundary to "Constraint" the only sub-type in the list is "Symmetry". "2D Bounding Plane" is not in the list.

Is there something I'm missing? Why do I not have a constraint for 2D bounding plane?
Please see https://forum.freecadweb.org/viewtopic.php?f=37&t=66741
Post Reply