FBXL5 wrote: ↑Sat Nov 12, 2022 11:53 pm
If we have section line marks on complex sections they should also be found on simple sections. I have tried to aktivate them toggling the Section Line Marks property, but it neither aktivates mars for simple sections nor deactivates the marks of complex section.
wandererfan wrote: ↑Wed Nov 16, 2022 2:12 pm The setting in the BaseView is the one you need to change.
Confirmed. I changed the property of the section view before. Hiding the marks in the BaseView of a complex section works as expected.
I'm waiting for the next weekly to check the simple sections.
NewJoker wrote: ↑Fri Nov 25, 2022 2:19 pm
I tried creating aligned section but it failed. Am I doing something wrong ?
Yes. You're supposed to select the View and the Sketch and press ComplexSection button; you have selected the Body "PolarPattern" and the Sketch, which doesn't work.
EDIT: Wait, that isn't it. But doing the ComplexSection works fine for me, what did you actually select when making it?
aapo wrote: ↑Fri Nov 25, 2022 3:34 pm
Yes. You're supposed to select the View and the Sketch and press ComplexSection button; you have selected the Body "PolarPattern" and the Sketch, which doesn't work.
That's what I do - I select the sketch and the view but the latter is replaced with polar pattern after enabling the complex section tool. Perhaps it's just how it works (replaces view with corresponding 3D geometry) and the problem lies somewhere else.
NewJoker wrote: ↑Fri Nov 25, 2022 3:41 pm
That's what I do - I select the sketch and the view but the latter is replaced with polar pattern after enabling the complex section tool. Perhaps it's just how it works (replaces view with corresponding 3D geometry) and the problem lies somewhere else.
Yes, there's definitely something fishy going on here. The above file "Aligned-Fixed.FCStd" I just uploaded doesn't load correctly for me. It seems that the Aligned Section in your example sometimes works, and sometimes doesn't, and it doesn't seem to be really deterministic.
On the advanced tab, there is an option for "Report progress". This generates messages as each threaded step is started and completed. That might give a clue.
wandererfan wrote: ↑Fri Nov 25, 2022 5:26 pm
On the advanced tab, there is an option for "Report progress". This generates messages as each threaded step is started and completed. That might give a clue.
Svg Hatch File: E:/FreeCAD_weekly-builds-27809-Win-Conda_vc14.x-x86_64/data/Mod/TechDraw/Patterns/simple.svg is not readable
Pat Hatch File: E:/FreeCAD_weekly-builds-27809-Win-Conda_vc14.x-x86_64/data/Mod/TechDraw/PAT/FCPAT.pat is not readable
Line Group File: E:/FreeCAD_weekly-builds-27809-Win-Conda_vc14.x-x86_64/data/Mod/TechDraw/LineGroup/LineGroup.csv is not readable
Line Group File: E:/FreeCAD_weekly-builds-27809-Win-Conda_vc14.x-x86_64/data/Mod/TechDraw/LineGroup/LineGroup.csv is not readable
Line Group File: E:/FreeCAD_weekly-builds-27809-Win-Conda_vc14.x-x86_64/data/Mod/TechDraw/LineGroup/LineGroup.csv is not readable
Line Group File: E:/FreeCAD_weekly-builds-27809-Win-Conda_vc14.x-x86_64/data/Mod/TechDraw/LineGroup/LineGroup.csv is not readable
ComplexSection has finished making section cut
Unhandled unknown exception caught in GUIApplication::notify.
NewJoker wrote: ↑Fri Nov 25, 2022 6:15 pm
E:/FreeCAD_weekly-builds-27809-Win-Conda_vc14.x-x86_64
27809 can't be the revision number, can it? That would put the build in Feb 2022, well before ComplexSection was added.
I haven't been able to recreate a fail with Aligned.FCStd since the first try. I've used local builds and "FreeCAD_weekly-builds-31097-2022-11-26-conda-Linux-x86_64-py310.AppImage".
I don't get the "is not readable" messages either. I thought those were fixed a long time ago.
Can this be a Windows only thing? I hope not, as I upgraded VirtualBox and now my Windows VM won't run FC.