This is 3D view,the hole is round。
- 1.jpg (16.56 KiB) Viewed 630 times
- 3.jpg (1.17 KiB) Viewed 630 times
- 2.jpg (19.33 KiB) Viewed 630 times
techdraw 2d abnomal
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
techdraw 2d abnomal
I used techdraw to generate a 2d drawing of a structure, and I found that the drilling on the top was abnormal. I don't know why?
This is 3D view,the hole is round。 This is the 2d diagram generated by Techdraw using 。The shape of the drill hole is not displayed properly.I don't know why?
This is 3D view,the hole is round。 This is the 2d diagram generated by Techdraw using 。The shape of the drill hole is not displayed properly.I don't know why?
Re: techdraw 2d abnomal
Hi and welcome to the forum!
That's all ok, the points come from the seam which every circle has. They vanish on export and you can hide them in the view with TechDraw Toggle.
That's all ok, the points come from the seam which every circle has. They vanish on export and you can hide them in the view with TechDraw Toggle.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: techdraw 2d abnomal
Ok,I got it. Thks.chrisb wrote: ↑Thu Jun 16, 2022 6:54 am Hi and welcome to the forum!
That's all ok, the points come from the seam which every circle has. They vanish on export and you can hide them in the view with TechDraw Toggle.
I am newer for freecad,I am not familiar with many functions。