Hi,
I am using version 0.19, revision 24366, and I am encountering a weird behaviour when I try to convert some sketches to draft objects in the Draft WB.
I have done this before several times and it worked perfectly.
The 3 sketches are well defined, full constrained and are dependend on each other (A->B->C). Since I suspected the sketches to be faulty, I have even tried to extrude them in Part WB and that gave a perfect result. Also the spatial references are perfect when I extrude a combination of sketches.
However, now when I try to convert the sketches into draft objects using the "bidirectional conversion" feature (I only need the direction skect2draft), the conversion doesn't work. It either creates an uncomplete (but still closely related) output on the less complicated sketch. On the more complicated sketch it creates complete garbage. Is there a bug in the conversion feature, do I have the wrong preferences, or what can be going on there?
Anyone can give a hint?
regards
Stan
convert sketch to draft doesn't work
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: convert sketch to draft doesn't work
Post a sample file.
Re: convert sketch to draft doesn't work
You should retry with a current 0.20 or 0.21; the latter being compulsory if it goes wrong with 0.20.
And may I ask what you intend to do? Most tools work well with sketches.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: convert sketch to draft doesn't work
There is also something else you can do: make a downgrade+upgrade of the sketch.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: convert sketch to draft doesn't work
Again: Post a sample file.