Good morning to all.
I've just made this tutorial, very strait forward to follow.
https://www.youtube.com/watch?v=Y86grfV ... TMQSpF7Pt4
I'ts a pipe with a curve and a flange in one of the ends.
After following the tutorial I wanted to copy the flange to the other end.
1 - Clone the flange (Dolly sheep )
2 - Now I could not get a simple way to align the cloned flange to the other end of the pipe.
Can you help me with this "simple" task?
Thank you!
How to correctly move objects?
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
How to correctly move objects?
Learning is a passion.
Re: How to correctly move objects?
Assuming you are using Part Design workbench, the Manipulator workbench should handle it.
If in Part workbench and you've done a Draft Clone, The Part workbench Attachment could be used.
If in Part workbench and you've done a Draft Clone, The Part workbench Attachment could be used.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: How to correctly move objects?
Thank you!
The Manipulator workbench did the job!
I have to get used to all of this scattered tools!
The Manipulator workbench did the job!
I have to get used to all of this scattered tools!
Learning is a passion.