PolarPattern with Z-axis shift depending on the function of angle

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
User avatar
Vincent B
Veteran
Posts: 4713
Joined: Sun Apr 05, 2015 9:02 am
Location: La Rochelle, France

Re: PolarPattern with Z-axis shift depending on the function of angle

Post by Vincent B »

Eventually found a solution. Fantastic is Lattice2. ;)
Attachments
Capture2.JPG
Capture2.JPG (23.49 KiB) Viewed 223 times
Special_PolarPattern.FCStd
(185.28 KiB) Downloaded 12 times
edwilliams16
Veteran
Posts: 3107
Joined: Thu Sep 24, 2020 10:31 pm
Location: Hawaii
Contact:

Re: PolarPattern with Z-axis shift depending on the function of angle

Post by edwilliams16 »

I found a way, using your parametric curve - but I needed to make an array of vertical construction lines at the cylinder locations. Otherwise I could not figure out how to get the correct attachment there.
Screen Shot 2022-12-04 at 2.28.14 PM.png
Screen Shot 2022-12-04 at 2.28.14 PM.png (37.32 KiB) Viewed 189 times
Screen Shot 2022-12-04 at 2.28.28 PM.png
Screen Shot 2022-12-04 at 2.28.28 PM.png (15.02 KiB) Viewed 189 times
Screen Shot 2022-12-04 at 2.34.54 PM.png
Screen Shot 2022-12-04 at 2.34.54 PM.png (40.08 KiB) Viewed 189 times
Attachments
Special_polarpattern_EW.FCStd
(121.62 KiB) Downloaded 12 times
Post Reply