Challenges?
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Challenges?
who can create this part fastest? it doesn't have to be parametric.
https://studycadcam.blogspot.com/2020/0 ... s-999.html
https://studycadcam.blogspot.com/2020/0 ... s-999.html
Last edited by thomas-neemann on Fri Jul 15, 2022 4:54 am, edited 1 time in total.
Re: Challenge?
Quick and dirty, incl. frame and title block:
-
- Veteran
- Posts: 3194
- Joined: Thu Sep 24, 2020 10:31 pm
- Location: Hawaii
- Contact:
Re: Challenge?
Datum Plane is redundant. Probably only need one polar pattern. Should have done the 3-point attachment to the sketches, not to the polar pattern geometry. But it works...
- Attachments
-
- challenge.FCStd
- (90.57 KiB) Downloaded 86 times
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Challenge?
thank you for your cooperation. roughly how long did it take?
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Challenge?
here is a suggestion in 3:20 min (without pauses for thought)
Re: Challenge?
It took about one hour. I was a bit too tired and made it a hexagon shape at first. Then it took a while to convert it to octagon.thomas-neemann wrote: ↑Fri Jun 24, 2022 3:45 am thank you for your cooperation. roughly how long did it take?
Now that I know how to build it my way, it won't take longer as relaxed 10 minutes.
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Challenge?
I think this is a good time. can you upload the file to learn from it?
Re: Challenge?
About 5min, another method:
- papyblaise
- Veteran
- Posts: 8016
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Challenge?
I don't understand what Thomas did
in more than 1 hour and with a lot of back and forth from one Wb to another
in more than 1 hour and with a lot of back and forth from one Wb to another
- Attachments
-
- 999.FCStd
- (100.29 KiB) Downloaded 80 times
-
- 999.JPG (21.88 KiB) Viewed 11796 times
- thomas-neemann
- Veteran
- Posts: 11964
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Challenge?
the 5 mm is a good indication, i made a mistake there.
the model has a curve here?
edit
I read 5 mm, but it's 5 min. In my opinion, that's a very good value for this parametric result
Last edited by thomas-neemann on Fri Jun 24, 2022 8:05 am, edited 1 time in total.