Challenges?

[thomas-neemann]

who can create this part fastest? it doesn't have to be parametric.

https://studycadcam.blogspot.com/2020/0 ... s-999.html

3D CAD EXERCISES (WWW.STUDYCADCAM.COM) 999.png (177.5 KiB) Viewed 3537 times

[FBXL5]

Quick and dirty, incl. frame and title block:

Challenge.png (123.22 KiB) Viewed 3481 times

[edwilliams16]

Screen Shot 2022-06-23 at 2.08.43 PM.png (17.82 KiB) Viewed 3469 times

Datum Plane is redundant. Probably only need one polar pattern. Should have done the 3-point attachment to the sketches, not to the polar pattern geometry. But it works...

Screen Shot 2022-06-23 at 2.10.35 PM.png (32.68 KiB) Viewed 3469 times

[thomas-neemann]

...

...

thank you for your cooperation. roughly how long did it take?

[thomas-neemann]

here is a suggestion in 3:20 min (without pauses for thought)

Bildschirmfoto_2022-06-24_06-17-22.png (23.03 KiB) Viewed 3397 times

617.FCStd

(23.23 KiB) Downloaded 34 times

[FBXL5]

thank you for your cooperation. roughly how long did it take?

It took about one hour. I was a bit too tired and made it a hexagon shape at first. Then it took a while to convert it to octagon.
Now that I know how to build it my way, it won't take longer as relaxed 10 minutes.

[thomas-neemann]

...
Now that I know how to build it my way, it won't take longer as relaxed 10 minutes.

I think this is a good time. can you upload the file to learn from it?

[wieszak17]

About 5min, another method:

999.jpg (25.96 KiB) Viewed 3322 times

999.FCStd

(112.22 KiB) Downloaded 34 times

[papyblaise]

I don't understand what Thomas did
in more than 1 hour and with a lot of back and forth from one Wb to another

[thomas-neemann]

...

the 5 mm is a good indication, i made a mistake there.

the model has a curve here?

1.png (14.45 KiB) Viewed 3310 times

edit

I read 5 mm, but it's 5 min. In my opinion, that's a very good value for this parametric result