Challenges?

[papyblaise]

you hope that we will make you all your project for free
don't forget to make a big donation to the fc foundation

[thomas-neemann]

you hope that we will make you all your project for free
don't forget to make a big donation to the fc foundation

don't worry I've already done it . here it is

https://www.youtube.com/watch?v=4VRjD-Iunnc

phpBB [video]

[papyblaise]

Ha ok, so here are 2 finished just before nightfall

[thomas-neemann]

Ha ok, so here are 2 finished just before nightfall

how long did it take to get here?

can you upload your file?

[Vincent B]

here my hopper.
@thomas:-> check your parts, the compound provided seems have some troubles.

[thomas-neemann]

here my hopper.
@thomas:-> check your parts, the compound provided seems have some troubles.

thanks for the cooperation. How long did it take?

your construction looks like this.

Bildschirmfoto_2023-01-27_20-02-37.png (5.66 KiB) Viewed 438 times

I would suspect something like that in a welded construction

Bildschirmfoto_2023-01-27_20-06-52.png (7.76 KiB) Viewed 438 times

tn.FCStd

(17.12 KiB) Downloaded 9 times

[Vincent B]

this kind of part must have a minimum of welded sheet (1 or 2) it's better to bend it.
unfortunately, sheetmetal wb can't help to design that yet.
I spend about 1 hour to think about rights face to offset.

[thomas-neemann]

this kind of part must have a minimum of welded sheet (1 or 2) it's better to bend it.
....

that's right.
the best method is one. sometimes a company only has the option of welding.

[Vincent B]

the fastest workflow for this assembly and construction of the connecting element is sought

using Assembly4
Not the fastest way, but parametric.

[thomas-neemann]

..

i have assembly4
not installed. it looks like this to me.

Bildschirmfoto_2023-01-28_18-09-44.png (16.57 KiB) Viewed 206 times

Is it the same for you?