I have the same error.Cropduster wrote: ↑Mon Nov 28, 2022 6:50 pm Thanks Chris_G, operating the Interpolate feature on the same file still did not work, but I notice the error lines are different from previous. So, is this associated with some aspect of Ubuntu I haven't installed/updated?
18:44:20 Running the Python command 'Interpolate' failed:
Traceback (most recent call last):
File "/home/brianw/.local/share/FreeCAD/Mod/Curves/./freecad/Curves/interpolate.py", line 342, in Activated
source = self.parseSel(s)
File "/home/brianw/.local/share/FreeCAD/Mod/Curves/./freecad/Curves/interpolate.py", line 333, in parseSel
verts = obj.Object
'Sketcher.SketchObject' object has no attribute 'Object'
Curves workbench
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Curves workbench
Re: Curves workbench
OK. New fix. Please try again.
-
- Posts: 16
- Joined: Mon Jun 21, 2021 7:22 pm
Re: Curves workbench
Thanks Chris_G, updated to 0.6.2 but alas it didn't work. Attached is a screenshot after I used the Approximate Tool: the Interpolate tool produced the text shown in the Report view.
- Attachments
-
- Screenshot from 2022-11-29 17-25-41.jpg (140.9 KiB) Viewed 953 times
Re: Curves workbench
I forgot to push the fix. Done
Please try again with version 0.6.3
Please try again with version 0.6.3
-
- Posts: 16
- Joined: Mon Jun 21, 2021 7:22 pm
Re: Curves workbench
Thanks Chris_G, the update did produce a result this time, but not as expected. I was trying to connect the ends of the lines in the x-direction including the 1st point up the z-axis from the origin (lowest point). They were selected in sequence and produces the same result which ever the direction. Maybe the attached screenshot might help.
- Attachments
-
- Screenshot from 2022-11-29 19-59-29.jpg (144.59 KiB) Viewed 906 times
Re: Curves workbench
OK, so I reverted the latest changes that were not compatible with current FreeCAD Stable 0.20Cropduster wrote: ↑Tue Nov 29, 2022 8:09 pm Thanks Chris_G, the update did produce a result this time, but not as expected. I was trying to connect the ends of the lines in the x-direction including the 1st point up the z-axis from the origin (lowest point). They were selected in sequence and produces the same result which ever the direction. Maybe the attached screenshot might help.
Please update Curves to 0.6.4 and try again.
-
- Posts: 16
- Joined: Mon Jun 21, 2021 7:22 pm
Re: Curves workbench
Thanks Chris_G, It doesn't look like v0.6.4 is available yet. My FreeCAD Addon Manager only shows v0.6.3
Re: Curves workbench
Silly me.
I have again forgot to push the fix.
I definitely shouldn't challenge my single-thread brain.
I have again forgot to push the fix.
I definitely shouldn't challenge my single-thread brain.
-
- Posts: 16
- Joined: Mon Jun 21, 2021 7:22 pm
Re: Curves workbench
Chris_G, Many thanks, it works. Thanks for your patience and persistence.
Re: Curves workbench
... thanks, Interpolation_Curve works again,
but Rotation_Sweep still doesn't (every day at least one trial!)
but Rotation_Sweep still doesn't (every day at least one trial!)
- Attachments
-
- test_rotationSWeep_H.FCStd
- FC.20.1
- (49.3 KiB) Downloaded 19 times