bon enfin , Quebec c'est français , donc protusion , extrusion , pad c'est équivalent
parcontre dans PartDesign , il est interdit d'avoir 2 objets dans le même body (désolé body n'est pas non plus québecois )
well finally, Quebec is French, so protusion, extrusion, pad is equivalent
however in PartDesign , it is forbidden to have 2 objects in the same body (sorry body is not Quebecois either)
All sketches dissapear when doing a new extrusion
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- papyblaise
- Veteran
- Posts: 7877
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
- Shalmeneser
- Veteran
- Posts: 9475
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: All sketches dissapear when doing a new extrusion
How can you define INside and OUTside ?
Your file is a joke, are you a troll ? (2 bad pad with the same sketch, 2 bodies)
Which version ? (follow link in red banner)
Your file is a joke, are you a troll ? (2 bad pad with the same sketch, 2 bodies)
Which version ? (follow link in red banner)
- Attachments
-
- Capture d’écran 2022-11-30 185550.jpg (21.59 KiB) Viewed 314 times
-
- Capture d’écran 2022-11-30 185340.jpg (32.3 KiB) Viewed 314 times
-
- MakeWithTech_Nr3_3e_SHALM.FCStd
- (14.19 KiB) Downloaded 7 times
Re: All sketches dissapear when doing a new extrusion
Think of a sketch line as a border. You can either be inside or ouside. If you are outside and you cross a border you are inside. If you are inside and you cross a border you are outside. If you have T-junctions you can find paths so that you are at the same time inside and outside. This is forbidden.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: All sketches dissapear when doing a new extrusion
I agree that the sketch might be a joke. If a troll is someone who did technical drawings 47 years ago when "CAD" consisted of paper, pencil rulers and triangles then I qualify as a troll.
I am just attempting to learn CAD from the following youtuber video and ran into unexplained CAD errors.
https://youtu.be/3LiKwUFSbAw
I clearly missed something somewhere and is just requesting advice to clarify my problem.
Thank you for responding I really do appreciate it.
Regard Deon..
I am just attempting to learn CAD from the following youtuber video and ran into unexplained CAD errors.
https://youtu.be/3LiKwUFSbAw
I clearly missed something somewhere and is just requesting advice to clarify my problem.
Thank you for responding I really do appreciate it.
Regard Deon..
- Shalmeneser
- Veteran
- Posts: 9475
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: All sketches dissapear when doing a new extrusion
This video is bad.Deon079 wrote: ↑Fri Dec 02, 2022 7:15 pm I am just attempting to learn CAD from the following youtuber video and ran into unexplained CAD errors.
https://youtu.be/3LiKwUFSbAw
A sketch with two rectangles side by side can perhaps produce a pad but the result is bad : Part_CheckGeometry.
It's worse with 2 rectangles intersecting themselves in the same sketch.