Hello All
here I like to provide a solar dehydrator design, i tried to make it parametric but it works not fully cause of some mistakes,
but anyway I'm happy with it, I also will try to do the tech drawings then I also will provide them
Greetings
Nanayaw
Solar Dehydrator Design
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
-
- Posts: 31
- Joined: Sat Sep 24, 2022 3:52 pm
Solar Dehydrator Design
- Attachments
-
- Solar_Dehydrator.FCStd
- (685.78 KiB) Downloaded 59 times
Re: Solar Dehydrator Design
Interesting! Could you add your FreeCAD version information? And are you going to build it too (and where)? I'd love to see some pictures.
Regards / Viele Grüße
Max
Max
- Shalmeneser
- Veteran
- Posts: 9560
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Solar Dehydrator Design
Just looking at Foundation :
* why do you need DatumPlane each time ?
* PartDesign_Clone?
* Draft_PolarArray ?
* do you need all elements to be in differents bodies or one body could contain all the foundation ?
* why do you need DatumPlane each time ?
* PartDesign_Clone?
* Draft_PolarArray ?
* do you need all elements to be in differents bodies or one body could contain all the foundation ?
-
- Posts: 31
- Joined: Sat Sep 24, 2022 3:52 pm
Re: Solar Dehydrator Design
Hello M4x and Shalmeneser
Freecad Version
At the moment I don't like to build it i only will do the design at the moment
Thanks Shalmeneser for your suggestions
Yes you arte right the date plane i used without sence >> I will improve on my next design
The issue with arrys I know but how to use it I have to try
Part design clone I also will check
Greetings
Nanayaw
Freecad Version
Code: Select all
OS: KDE Flatpak runtime (XFCE/xfce)
Word size of FreeCAD: 64-bit
Version: 0.20.1.29410 (Git)
Build type: Release
Branch: (HEAD detached at 0.20.1)
Hash: f5d13554ecc7a456fb6e970568ae5c74ba727563
Python 3.9.9, Qt 5.15.5, Coin 4.0.0, Vtk 8.2.0, OCC 7.6.2
Locale: German/Germany (de_DE)
Installed mods:
* Curves 0.5.8
* lattice2 1.0.0
* CurvedShapes 1.0.4
* FEM_FrontISTR 0.1.0
* workfeature
* Manipulator 1.4.9
* Defeaturing 1.2.0
Thanks Shalmeneser for your suggestions
Yes you arte right the date plane i used without sence >> I will improve on my next design
The issue with arrys I know but how to use it I have to try
Part design clone I also will check
Greetings
Nanayaw